Overview
The Baer 4301355B is a black 13.0 inch Pro Plus front disc brake kit for the 1991 to 1993 GMC Syclone and Typhoon. It bundles a six-piston caliper, a two-piece slotted and drilled rotor, and spindles and hubs into one front-axle set.
The Pro Plus line is built as a complete performance brake package, and this black powder coated version shares its rotor size and template with the silver and red 13-inch kits. Caliper color and finish are the differences between the three versions.
Key features
- Six-piston (6P) caliper with stainless steel pistons and abutments, plus noise suppression clips
- Staggered piston layout to minimize uneven pad wear
- Dual seals rated against dust, weather and pressure
- Two-piece slotted and drilled rotor, zinc-plated, with a billet aluminum hat
- Forged or billet aluminum components, CNC machined from US-sourced stock
- Black powder coated finish
- Hubs fitted with bearings and races, packed with Redline synthetic grease
- Manufactured in Phoenix, Arizona
Hub and bearing care
Hubs and wheel bearings carry the truck’s weight and the braking force from the rotor, so their condition matters as much as the new hardware. Before installation, check the hub face for scoring and make sure the bearing seats are clean. Grease that has been stored for a long time may separate, so inspect it rather than assume it is fresh.
Once the truck is on the road, bearings should be checked for play and heat. A warm hub after a short drive is normal, but a hub that runs hot or makes a grinding noise needs attention. Keep the front axle lubricated on the schedule your vehicle requires, and avoid overfilling the hub.
- Feel for play by rocking the wheel at the top and bottom
- Listen for grinding or humming that changes with speed
- Re-torque wheel fasteners after the first few trail runs
- Keep grease off the rotor and pad surfaces
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301355B |
| UPC | 844165046448 |
| Kit type | Kit |
| Axle | Front |
| Rotor diameter | 13 inch |
| Rotor construction | 2-piece |
| Rotor style | Slotted, drilled |
| Rotor material | Iron with aluminum hat |
| Rotor surface | SDZ |
| Front rotor included | Yes |
| Caliper | 6-piston (6P) |
| Caliper color | Black |
| Caliper pistons | Stainless steel, staggered |
| Finish | Powder coated |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 17.0 inch |
| Template | Q082H |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
It fits the 1991 GMC Syclone and the 1992 to 1993 GMC Typhoon.
Other GMC and Chevrolet generations, and years outside 1991 to 1993, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bearings and races are already in the hubs, so mounting is a bolt-on job to the control arms. Lug nuts are not supplied, so a set matching the 5×4.50/5×4.75 bolt pattern is needed. Test the Q082H template against your intended wheel, since styles and makers vary. A qualified technician should check the brakes once the system is on the vehicle.
What’s included
The kit includes the 13-inch front rotor, the six-piston caliper, and the spindles and hubs as part of the set.
Not included: Lug nuts.













