Overview
The Baer Brakes 4301299S is a complete Pro front brake system for the 2006–2009 Chevrolet Trailblazer SS, with silver 6-piston calipers and 14 inch slotted, drilled rotors. It is built for 2WD and AWD Trailblazer SS vehicles and works with the OE spindles and hubs.
Baer assembles each hub before it leaves the factory, with the bearings and races installed and packed with Redline synthetic grease. The calipers are CNC machined from forged or billet aluminum, powder coated, and manufactured in Phoenix, Az. The kit arrives ready to bolt onto the existing control arms.
Key features
- 6-piston caliper in a powder-coated silver finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to reduce uneven pad wear
- Dual seals for dust, weather and pressure
- 14 inch slotted, drilled, zinc-plated rotor on an iron rotor with an aluminum hat
- Hubs pre-assembled with bearings and races, packed with Redline synthetic grease
Before you buy
A front brake upgrade changes more than stopping power. Larger rotors and multi-piston calipers add weight and can change how wheels clear the caliper, so check clearance before the tires are mounted. Wheel offset, backspacing and tire thickness all affect how much room is left behind the spokes. A trial fit with the template is the simplest way to avoid rubbing.
Pads, hoses and wheel bearings are often serviced alongside brake hardware. The hubs here arrive with bearings already installed, so bearing service is not expected soon after installation, but the pads should be checked at each tire rotation. Bedding in new pads gradually helps the rotor surface settle and gives smoother braking.
- Measure the caliper to wheel gap before final mounting
- Check brake fluid level and condition after the first install
- Replace worn pads before the rotor surface is scored
- Recheck lug nut torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301299S |
| UPC | 844165038788 |
| Sold as | Kit |
| Caliper | 6-piston (6P), silver |
| Rotor diameter | 14 inch |
| Rotor style | Slotted, drilled |
| Rotor material | Iron with aluminum hat |
| Front rotor included | Yes |
| Lug nuts included | No |
| Wheel bolt pattern | 6×5.00 |
| Minimum wheel diameter | 18.0 inch |
| Hoses | Reuses OE hoses |
| Template | Q077P |
| Country of origin | US |
Vehicle fitment
It fits the 2006–2009 Chevrolet Trailblazer (SS) and covers both the 2WD and AWD versions of that model.
Years outside 2006–2009 and GM models other than the Trailblazer SS are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs and rotor arrive assembled, so installation is mainly bolting the unit to the control arms and reusing the OE hoses. Lug nuts are not included, so plan on a set that suits the 6×5.00 bolt pattern and your wheels.
Not every aftermarket wheel style will clear this brake. Check wheel clearance against the 18.0 inch minimum wheel diameter and use the Q077P template before mounting wheels. Brake work is best left to a qualified installer.
What’s included
The kit includes the front 6-piston calipers, the 14 inch front rotors, and the hubs with bearings and races already installed. It reuses the vehicle’s OE hoses.
Not included: Lug nuts.













