Overview
The Baer Brakes 4302248R is a red Pro Plus rear brake system for GM 10/12 bolt rear axles that use C-clip axles and the small car pattern flange. Its six-piston caliper clamps a 13 inch two-piece slotted, drilled and zinc-plated rotor, and a backing plate carries a one-piece park brake shoe assembly. The kit suits rear axle upgrades on wheels with 5×4.75 or 5×5.00 bolt patterns.
Baer builds the system in Phoenix, Az, from CNC-machined forged or billet aluminum parts with a powder coated finish. The caliper has stainless steel pistons, abutments and noise suppression clips, and its staggered pistons are designed to reduce uneven pad wear. Dual seals guard against dust, weather and pressure.
Key features
- Six-piston caliper in red with stainless steel pistons
- Staggered pistons to minimize uneven pad wear
- Dual dust, weather and pressure seals
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Backing plate serves as caliper mount and houses the park brake shoe assembly
- Stainless braided hoses with hardware, DOT approved
- Pads use the D0731 pad type
- Powder coated finish on CNC-machined components
Pads, rotors and fluid care
Pad material matters as much as the rotor on a rear disc upgrade. Pads of the D0731 type fit these calipers, but the compound should suit how the vehicle is driven, whether that is mostly highway, towing or trail use. Choose pads that match the rotor surface, and avoid mixing compounds on the same axle.
Brake fluid absorbs moisture over time, so a new caliper and hose set should be bled once the system is assembled. Check hoses for chafing where they pass near suspension parts, and replace any hose that shows cracking. Inspect the hat bolts and wheel studs at each brake job, since a loose hat can cause vibration that feels like a rotor problem.
- Bleed the system after any hose or caliper change
- Look for rubbing on hoses near suspension arms
- Re-torque wheel lug nuts after the first drive
- Replace pads and rotors together where wear is uneven
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302248R |
| UPC | 844165043010 |
| Package type | Kit |
| Caliper | 6-piston, floating, red |
| Rotor type | 2-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Minimum wheel diameter | 17.0 inch |
| Wheel bolt pattern | 5×4.75/5×5.00 |
| Lug count | 5 lug |
| Axle flange | GM 10/12 bolt C-clip, small car pattern |
| Brake pad FMSI | D0731 |
| Template | Q110H |
| Hose material | Steel braided, DOT approved |
| Grade type | Performance |
| Includes park brake | Yes |
| Includes park brake cables | No |
| Country of origin | US |
Vehicle fitment
The kit is matched by axle: GM 10/12 bolt rear axles with C-clip axles, small car pattern flanges, and 5×4.75 or 5×5.00 wheel bolt patterns with 5 lugs. Measure your rear axle and wheel bolt pattern against those details before ordering.
Rear axles with a different flange pattern or a non-C-clip design fall outside the specifications described here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the wheel to the Q110H template before mounting anything, since Baer cannot guarantee fit with every wheel style and manufacturer. The rotors arrive pre-assembled with stainless hardware.
What’s included
The package covers the red six-piston caliper, the 13 inch two-piece rear rotor, the backing plate with its one-piece park brake shoe assembly, and stainless braided hoses with hardware.
Not included: front rotor, park brake cables, and lug nuts, which must be supplied separately.















