Overview
The Baer Brakes 4262205S is a silver Extreme Plus rear brake system for Ford 9 Inch axles with early big bearing housing ends and a 5×5.00 wheel bolt pattern. It pairs a 14 inch 2-piece slotted, drilled rotor with a 1-piece Monoblock 6-piston 6S caliper and a park brake shoe assembly held in Baer’s backing plate.
The 14 inch Extreme Plus fits most wheels 18 inch or larger, but fit with a specific wheel style cannot be guaranteed. The rotors come pre-assembled with NAS high grade stainless hardware. Use the N085P template to check clearance against your wheel.
Key features
- 1-piece Monoblock six-piston 6S caliper, CNC machined from US sourced 2618 aluminum forging
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to reduce uneven pad wear
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc plated rotor with billet aluminum hat
- Powder coated finish; caliper made in Phoenix, AZ
Caring for a multi-piston kit
A six-piston rear caliper spreads clamping force across more pad area, which helps even out wear but also means the pads and rotor are working harder. Keep an eye on pad thickness on both sides of the caliper, since uneven wear can point to a sticking piston or a binding slide. Clean the caliper and backing plate when the axle is serviced so dust and road salt do not build up near the seals.
Stainless hoses resist abrasion better than rubber, but they still need a look for kinks and fitting leaks. Because the park brake shoes sit inside the backing plate, check their adjustment whenever the rear brakes are opened. Grease and thread-locked bolts should be checked during the first few service intervals after installation.
- Inspect the pad faces for uneven wear
- Look for fluid seepage at the caliper seals
- Recheck hardware after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262205S |
| UPC | 844165037316 |
| Sold as | Kit |
| Caliper | 6S monoblock, 6 pistons, fixed type |
| Caliper color | Silver |
| Rotor outside diameter | 14.0 inch |
| Rotor type and construction | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor thickness | 1.25 |
| Pad FMSI number | D1247 |
| Brake hose | Stainless steel |
| Park brake | Included; park brake cables not included |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Wheel bolt pattern | 5×5.00 |
| Lug count | 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Template | N085P |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
This kit is built for a rear axle end rather than a single vehicle. The Ford 9 Inch Early Big Bearing axle flange and 5×5.00 bolt pattern identify the housing, not a year, make or model. Check the N085P template against your wheel and confirm the housing flange before choosing this kit.
Match the early big bearing flange to your own housing first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors come pre-assembled with NAS high grade stainless hardware, so no separate rotor hardware is needed. Stainless braided hoses and hardware are included, while park brake cables are not. The 18.0 inch minimum wheel diameter should be checked against the N085P template before installation. A shop experienced with multi-piston rear disc systems is the safer choice for this work.
What’s included
The kit covers the 14.0 inch 2-piece rotor with billet aluminum hat, the 6S monoblock caliper, the backing plate with its park brake shoe assembly, and stainless braided hoses with hardware.
Not included: park brake cables, lug nuts, and a front rotor.















