Overview
The Baer Brakes Pro Plus 14.0 Inch front brake system, part number 4301356S, is a complete front disc brake kit for the 1991 GMC Syclone and the 1992-1993 GMC Typhoon, built with OE spindles and hubs. The kit includes the front rotor.
The 6-piston caliper and 2-piece slotted, drilled rotor are the core of the system. The hubs arrive assembled, with bearings and races installed and packed with Redline synthetic grease, so the installation is largely a matter of bolting the assembly onto the control arms.
Key features
- Two-piece, 6-piston, 6P caliper manufactured in Phoenix, AZ
- CNC machined from US sourced forged or billet aluminum
- Powder coated silver finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Hubs pre-assembled with bearings and races packed with Redline synthetic grease
Installation and bolt pattern
Because lug nuts come separately, the wheel mounting hardware is the first thing to sort out. Match the seat type to the wheel, and make sure the thread engagement is full. Tighten the nuts in a star pattern and recheck them after the first few miles, since new hubs can settle slightly.
Older GM front ends often show worn ball joints, tie rod ends and rubber bushings around the control arms. Replacing these while the spindles are apart saves a second tear-down later, and it keeps the new rotor running true against the pads. Keep the caliper bolts and brake hose routing free of contact with steering parts.
- Confirm the lug seat style matches the wheel before fitting
- Check caliper bolts for proper seating after first use
- Route the brake hose clear of steering components
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301356S |
| UPC | 844165046493 |
| Sold as | Kit |
| System | Pro Plus 14.0 Inch brake system, front |
| Rotor diameter | 14 inch |
| Rotor style | Slotted, drilled |
| Rotor construction | 2-piece |
| Rotor material | Iron with aluminum hat |
| Rotor surface | SDZ |
| Caliper | 6-piston, 6P, silver |
| Caliper finish | Powder coated |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 18.0 inch |
| Front rotor included | Yes |
| Lug nuts included | No |
| Box count | 1 |
| Template | QO82P |
| Country of origin | US |
Vehicle fitment
It fits the 1991 GMC Syclone and the 1992-1993 GMC Typhoon.
Other GMC models and other Syclone or Typhoon model years are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the hubs come assembled, the work is bolting the assembly onto the control arms. Lug nuts are not included, so have lug nuts that match the 5×4.50/5×4.75 bolt pattern on hand. Baer cannot guarantee fit with every wheel style, so lay the QO82P template against your wheel and check clearance against the 18.0 inch minimum wheel diameter. Brake work should be checked by a qualified technician.
What’s included
The kit includes the front 14.0 inch brake system: the 6-piston silver caliper, the 2-piece slotted, drilled rotor with billet aluminum hat, and the spindles and hubs, packed as one box.
Not included: Lug nuts.













