Overview
The Baer Brakes SS4 Plus rear brake system, part 4262260B, is a complete rear disc brake kit for Ford 9 inch early big bearing housing ends with a 5×4.50/5×4.75 bolt pattern. It combines a four-piston S4 caliper, a 13.0 inch two-piece rotor and a backing plate that also carries the park brake shoe assembly.
Baer designed the backing plate to serve as the caliper mount while housing a one-piece park brake shoe. The rotors arrive pre-assembled with NAS high grade stainless hardware, and the system uses the DR1-C pad type. The kit suits performance-minded owners fitting a larger drilled rotor to a big bearing 9 inch rear axle. Baer manufactures the kit in Phoenix, Arizona.
Key features
- Four-piston S4 caliper in black with powder coated finish, CNC machined from US-sourced forged or billet aluminum
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- One-piece park brake shoe assembly housed in the backing plate
- Stainless braided hoses with stainless hardware included
- Performance grade system with DOT approved brake hose
Before you buy
Rear brake kits for big bearing 9 inch axles are chosen mainly by axle flange and bolt pattern, followed by wheel clearance. The axle end, hub face and wheel mounting surface all need to line up before the caliper and rotor are considered, so measure those first rather than relying on the axle name alone.
A four-piston caliper with a two-piece rotor adds more braking capacity at the rear, which can change how load moves through the axle and suspension. Owners often pair this type of upgrade with fresh pads, inspected hoses and a checked park brake, since those parts work together on the same axle.
Once installed, look at the rotor and pad faces periodically for scoring, heat marks and uneven wear. Check hose routing against suspension travel and confirm that the park brake shoe adjusts correctly before returning the vehicle to regular use.
- Measure the axle end and hub face before ordering
- Check hose routing against suspension travel
- Inspect pads and rotor faces after the first drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262260B |
| UPC | 844165028314 |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Caliper | S4, fixed, 4 pistons |
| Caliper color | Black |
| Rotor type | 2-piece, slotted, drilled, zinc-plated |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 0.81 inch |
| Rotor hat | Billet aluminum |
| Pad type | DR1-C (FMSI DR1-C) |
| Brake hose | Steel braided, DOT approved |
| Minimum wheel diameter | 17.0 inch |
| Park brake | Included (shoe assembly); cables not included |
| Template | S135H |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
The kit is identified by axle: Ford 9 Inch Early Big Bearing housing ends with a 5×4.50/5×4.75 bolt pattern. Template S135H lets you compare the system against your chosen wheel.
Installation notes
The park brake shoe is built into the backing plate, so the rear park brake works through the kit’s own shoe assembly. Park brake cables must be sourced separately. Rear brake work requires safe lifting and support, and a qualified technician should confirm bolt pattern, rotor clearance and hose routing before the vehicle returns to service.
What’s included
The kit includes the S4 calipers, two-piece slotted and drilled rotors pre-assembled with stainless hardware, the backing plate with park brake shoe assembly, and stainless braided hoses with hardware.
Not included: park brake cables and lug nuts.















