Overview
The Baer Brakes 4261079R is a red Extreme Plus front brake kit for the 1970 Ford Fairlane and Falcon, the 1970 to 1974 Ford Maverick, the 1970 to 1973 Ford Mustang, the 1970 to 1971 Ford Torino, the 1971 to 1974 Mercury Comet, the 1970 to 1973 Mercury Cougar, the 1970 Mercury Cyclone and the 1970 to 1971 Mercury Montego. Each of these is listed with factory drum brake spindles, and the kit is not meant for disc spindle cars.
The 6S red caliper is a one-piece monoblock with six pistons, machined from US-sourced 2618 aluminum and powder coated. Each rotor is a 14.0 inch two-piece slotted, drilled and zinc-plated unit on a billet aluminum hat, paired with D1247 pads and the N085P template.
Key features
- Billet hubs leave the factory with premium bearings already assembled
- Redline synthetic grease packs the bearings
- Billet dust caps complete each hub
- Braided stainless hoses come with the kit
- Stainless pistons, abutments and noise suppression clips in the monoblock caliper
- Staggered pistons and dual dust, weather and pressure seals
- Zinc-plated, slotted and drilled rotor on a billet aluminum hat, preassembled with NAS stainless hardware
Before the first road drive
A set of new hubs, rotors and braided hoses changes how the front end behaves on the first few stops. Pad bedding matters most in the first hundred miles of normal driving, when the friction surfaces are still forming a transfer layer. Gentle stops at moderate speed help that layer form evenly.
Braided hoses flex under pressure and can rub against the spindle or suspension if routed poorly. Look for contact points, kinks near fittings and any sign of weeping at the banjo bolts after the first drive, and tighten fittings only to the torque the installer used during setup.
- Make a series of moderate stops to bed the pads
- Check hose routing for rub points after the first drive
- Look for weeping at fittings and bolts after each use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261079R |
| UPC | 844165035619 |
| Caliper | 6S, 1-piece monoblock, 6-piston, fixed |
| Caliper color | Red |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor construction | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Hub | Billet aluminum |
| Bearings | Premium, packed with Redline synthetic grease |
| Dust caps | Billet |
| Hoses | Stainless steel braided |
| Pad type | FMSI D1247 |
| Template | N085P |
| Wheel bolt pattern | 5×4.50 |
| Lug count | 5 |
| Wheel stud size | 1/2-20 x 2.25 Inch |
| Minimum wheel diameter | 18.0 inch |
| Axle | Front |
| Grade | Performance |
| Front rotor included | Yes |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
Fits 1970 Ford Fairlane, 1970 Ford Falcon, 1970 to 1974 Ford Maverick, 1970 to 1973 Ford Mustang, 1970 to 1971 Ford Torino, 1971 to 1974 Mercury Comet, 1970 to 1973 Mercury Cougar, 1970 Mercury Cyclone and 1970 to 1971 Mercury Montego.
Disc-spindle vehicles are outside coverage, and years beyond the listed ranges are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hubs and bearings arrive assembled, and brackets and hardware are packed in. Lug nuts must be bought separately. Compare the 5×4.50 pattern and the 1/2-20 x 2.25 inch studs to your wheels, and have a qualified shop confirm the spindle assembly and hose routing before the car is driven.
What’s included
Front rotor with billet hub, 6S red caliper, braided stainless hoses, mounting brackets and hardware.
Not included: Lug nuts.














