Overview
The Baer Brakes 4301524S is an Extreme+ front brake kit for the 1991 GMC Syclone and 1992–1993 GMC Typhoon. It pairs a six-piston 6S caliper finished in silver with a 14 Inch two-piece slotted and drilled rotor, and it includes OE spindles and hubs.
Baer Brakes presents this kit as a complete front brake package. The hubs are assembled before the kit leaves the factory, with bearings and races installed and packed with Redline synthetic grease, so the main installation task is bolting the assembly onto the control arms.
Key features
- Forged one-piece monoblock caliper with six pistons and a 6S designation
- Silver powder coated caliper finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons intended to minimize uneven pad wear
- Dual seals for dust, weather and pressure protection
- Two-piece slotted, drilled, zinc-plated rotor with a billet aluminum hat
- Manufactured in Phoenix, Az from US sourced materials
Before you install
Front brake upgrades on these trucks often come down to how the new hardware works with the existing steering and suspension. Because the hubs and spindles arrive as a finished assembly, the check that matters most is clearance between the caliper, the wheel and the control arm geometry. Measure the space behind the wheel before assuming any aftermarket wheel will clear this rotor.
Pads, fluid and hoses are commonly replaced in the same job. Fresh pads should bed in properly before heavy braking, and rotor wear stays more even when pads suit the caliper’s pressure. Brake fluid absorbs moisture over time, so a fresh fill helps keep pedal feel consistent after new hardware goes in. Inspect the old rotor for heavy grooves or scoring before reusing any component.
- Check wheel clearance before mounting tires
- Inspect brake lines for chafing after install
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301524S |
| UPC | 844165049746 |
| Sold as | Kit |
| Caliper | 6S, six pistons, silver powder coated |
| Rotor diameter | 14 Inch |
| Rotor style | Slotted, drilled |
| Rotor construction | 2-piece |
| Rotor material | Iron with aluminum hat |
| Rotor surface | SDZ |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Min wheel diameter | 18.0 Inch |
| Template | N082P |
| Axle | Front |
| Front rotor included | Yes |
| Lug nuts included | No |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The manufacturer fitment list covers the 1991 GMC Syclone and the 1992–1993 GMC Typhoon, both as Extreme+ Front applications.
Other GMC or Chevrolet trucks and other model years of the Syclone or Typhoon are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs arrive with bearings and races installed and grease packed, so the work centers on bolting the assembly to the control arms. Lug nuts are not included and must be chosen separately. Baer cannot guarantee fit with every aftermarket wheel style, so compare clearance using the N082P template against the intended wheel before mounting.
What’s included
The hubs arrive with bearings and races installed and grease packed, so the work centers on bolting the assembly to the control arms. Lug nuts are not included and must be chosen separately. Compare clearance using the N082P template against the intended wheel before mounting.
Not included: lug nuts.













