Overview
The Baer Brakes 4261079S is a silver Extreme Plus front brake kit for 1970 Ford Fairlane and Falcon, 1970 to 1974 Ford Maverick, 1970 to 1973 Ford Mustang, 1970 to 1971 Ford Torino, 1971 to 1974 Mercury Comet, 1970 to 1973 Mercury Cougar, 1970 Mercury Cyclone and 1970 to 1971 Mercury Montego. It is built for these cars when they have factory drum brake spindles.
The kit pairs a 6S six-piston monoblock caliper with a 14.0 inch two-piece rotor, billet aluminum hubs and stainless braided hoses. Baer assembles the hubs with premium bearings packed in Redline synthetic grease, and billet dust caps finish each hub.
Key features
- Billet aluminum hubs arrive assembled with premium bearings
- Bearings packed with Redline synthetic grease
- Billet dust caps
- Stainless braided hoses and mounting brackets included
- Monoblock 6-piston 6S caliper with stainless pistons and noise suppression clips
- Staggered pistons to reduce uneven pad wear
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Pre-assembled NAS high grade stainless rotor hardware
Spindle type and hub setup
Spindle type decides whether a hub kit like this belongs on a car at all. Drum-spindle cars and disc-spindle cars use different hub mounting faces and bearing arrangements, so confirming the spindle before buying avoids a return. If the spindle is unclear, a technician can identify it by the mounting pattern and the components already on the hub.
Billet hubs with pre-packed bearings simplify the bearing service, but they still need correct preload and seating when installed. Bearings should turn smoothly without rough spots or noise, and the hub should not show play when the wheel is rocked. Keep the grease seal clean and avoid contaminating the bearing surfaces during installation.
Wheel studs and lug seats deserve attention as well. Check that studs are straight and undamaged, clean the hub face so the wheel sits flat, and use lug nuts with the correct seat style for your wheels. Re-check lug tightness after the first few drives, since new hardware can settle as it seats.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261079S |
| UPC | 844165035664 |
| Caliper | 6S, 1-piece monoblock, 6-piston, fixed |
| Caliper color | Silver |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor construction | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Hub | Billet aluminum |
| Bearings | Premium, packed with Redline synthetic grease |
| Dust caps | Billet |
| Hoses | Stainless steel braided |
| Pad type | FMSI D1247 |
| Template | N085P |
| Wheel bolt pattern | 5×4.50 |
| Lug count | 5 |
| Wheel stud size | 1/2-20 x 2.25 Inch |
| Minimum wheel diameter | 18.0 inch |
| Axle | Front |
| Grade | Performance |
| Front rotor included | Yes |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
The manufacturer fitment list covers 1970 Ford Fairlane, 1970 Ford Falcon, 1970–1974 Ford Maverick, 1970–1973 Ford Mustang, 1970–1971 Ford Torino, 1971–1974 Mercury Comet, 1970–1973 Mercury Cougar, 1970 Mercury Cyclone and 1970–1971 Mercury Montego.
Cars with factory disc brake spindles are not covered, since the kit requires drum brake spindles. Model years outside the listed ranges are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs come with bearings already assembled and packed, so the bearing service is done before the kit reaches you. Lug nuts are not supplied. Check that the 1/2-20 x 2.25 inch studs and your wheels suit the 5×4.50 pattern, and have a technician confirm the spindle setup before road use.
What’s included
Front rotor assemblies with billet aluminum hubs, 6S silver caliper, stainless braided hoses, mounting brackets and pre-assembled hardware.
Not included: Lug nuts.














