Overview
The Baer Brakes 4262681FR is a fire red SS4 Plus Dual Deep Stage rear brake kit for Ford 9 inch rear ends fitted with Torino or late big bearing housing ends. It is aimed at heavy, fast drag race cars that may also see street use, and it supplies a dual set of four S4 calipers with 1.375 inch pistons.
The kit is designed for 15 inch and larger wheels and pairs those calipers with 11.0 inch two-piece slotted, drilled and zinc plated rotors. Fit depends on the axle housing and flange size, so check them before buying.
Key features
- Four 4-piston S4 calipers in fire red powder coat, with hard anodized aluminum pistons and stainless steel abutments
- Two-piece slotted, drilled and zinc plated rotors built from iron with billet aluminum hats
- Billet aluminum hats drilled for 5/8 inch wheel studs
- High friction pads designed for drag race applications, with noise suppression clips
- DR1 pad type with semi-metallic friction material
- T compliant dust and weather seals
- Rotors arrive pre-assembled with NAS high grade stainless hardware, and mounting hardware is included
Torino axle checks
Identifying the axle is the first job before buying a rear brake kit. Ford 9 inch housings came in several bearing and flange styles, and the housing end must match the kit so the hub and rotor sit square. Measuring the axle flange and reading the housing stamping before ordering avoids a return.
Dual caliper setups add weight and heat to the rear, so the rest of the braking system should be reviewed with the kit. Brake lines, master cylinder size and any proportioning valve matter for balance under hard stops. Rear-biased wear is common when front brakes are underpowered.
Fire red powder coat holds up well under normal cleaning, but brake dust and road salt can still dull it. Wash the calipers periodically and check bleeder screws and dust boots at each service.
- Check the housing stamping before ordering
- Measure the axle flange carefully
- Review hoses and fluid with the kit
- Inspect pads at every service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262681FR |
| UPC | 844165038917 |
| Sold as | Set |
| Caliper type | Fixed, 4-piston S4 |
| Caliper color | Fire Red |
| Piston size | 1.375 inch |
| Piston quantity (rear caliper) | 4 |
| Rotor outside diameter | 11.0 inch |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor thickness | 1.02 |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Hat drilling | Billet aluminum, drilled for 5/8 inch wheel studs |
| Minimum wheel diameter | 15.0 inch |
| Pad type | DR1 (FMSI) |
| Friction material | Semi-metallic |
| Axle flange | Ford 9 inch Torino/Late Big Bearing |
| Axle flange requirement | 5.75 inch |
| Front rotors included | No |
| Park brake included | No |
| Lug nuts included | No |
| Brake hoses | Not included |
| Template | S125A |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 inch rear ends with Torino or late big bearing axle housing ends, a 5×4.50/5×4.75 bolt pattern and an axle flange that needs to be 5.75 inch. Check your housing and flange before ordering.
Installation notes
Rotors come pre-assembled with NAS high grade stainless hardware, and mounting hardware is included in the kit. Lug nuts, brake hoses and any park brake components are not supplied and must be sourced separately. A shop experienced with rear end brake work is the safest choice for setup on these calipers.
What’s included
A dual set of rear calipers (four S4 calipers with 1.375 inch pistons), two-piece slotted, drilled rotors with NAS stainless hardware, and mounting hardware. Sold as a set.
Not included: Front rotors, the park brake assembly, lug nuts and brake hoses are all outside this kit.















