Overview
The Baer Brakes Extreme Plus front brake system kit, part 4141022S, is a silver front disc brake kit for Dodge and Ram 1500 trucks. It pairs a 1-piece Monoblock 6-piston, 6S caliper with a 15-inch two-piece slotted, drilled rotor with billet aluminum hat, and it is built around the D1247 pad type.
The kit fits 2002–2010 Dodge Ram 1500, 2011–2018 Ram 1500 and 2019–2024 Ram 1500 Classic trucks, with the 19-24 Classic Body style included. It is set up for 5-lug wheels at 5×139.7mm. The 15-inch rotor fits most wheels 19 inch or larger.
Key features
- 1-piece Monoblock caliper with 6 pistons, 6S model, made in Phoenix, AZ
- Machined on CNC equipment from 2618 aluminum forging sourced in the US
- Powder coated finish
- Stainless steel pistons with abutments and noise suppression clips
- Staggered pistons designed to limit uneven pad wear
- Dual seals for dust, weather and pressure
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
Choosing a rotor size
A 15-inch rotor needs a wheel with enough inner clearance, and the wheel’s style and spoke pattern matter as much as its diameter. Measure the caliper’s position against the spokes and check that the tire’s load rating matches the truck’s gross weight before buying tires.
Heavier loads and towing put more heat into the front brakes, so brake fluid and pad condition deserve more frequent checks. A larger rotor adds mass but does not change the need for regular inspection of the hub and bearing.
Keep the 5×139.7mm pattern in mind when buying spacers or aftermarket wheels, and confirm fit with the wheel maker.
- Check inner clearance against the caliper
- Match tire load rating to the truck
- Confirm wheel studs suit 5×139.7mm
- Inspect the hub and bearing during brake service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4141022S |
| UPC | 844165040460 |
| Kit type | Kit |
| Caliper | 6S, 1-piece Monoblock, 6 pistons, fixed type |
| Caliper color | Silver |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.25 inch |
| Front rotor included | Yes |
| Lug nuts included | No |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×139.7mm |
| Minimum wheel diameter | 19.0 inch |
| Brake pad type | D1247 (FMSI) |
| Hoses | Re-uses OE hoses |
| Axle | Front |
| Grade | Performance |
| Template | N118U |
| Fitment notes | 19-24 Classic Body |
| Country of origin | US |
Vehicle fitment
It fits 2002–2010 Dodge Ram 1500, 2011–2018 Ram 1500 and 2019–2024 Ram 1500 Classic trucks, including the 19-24 Classic Body style.
Heavier-duty Ram models and Ram 1500 model years outside the ranges above fall outside coverage. Before ordering, match your truck’s year, model and trim to this coverage.
Installation notes
Rotors arrive pre-assembled with stainless hardware, and mounting brackets and hardware are included. Template N118U is specific to this system, so use it to check clearance against the wheel you plan to run, since the rotor fits most wheels 19 inch or larger. Brake work affects stopping, so have a qualified technician verify the installation before driving.
What’s included
Included in the box: the 6S caliper, a two-piece front rotor with billet aluminum hat, and mounting brackets and hardware.
Not included: lug nuts.














