Overview
The Baer Brakes 4262197R is a red-caliper rear Pro Plus disc brake system for Ford 9 inch rear axles with Torino (late big) bearing housing ends on a 5×5.00 inch bolt circle. A six-piston fixed caliper clamps a 14 inch two-piece rotor, and the backing plate that carries the caliper also houses a one-piece park brake shoe.
Baer sizes the 14 inch Pro Plus for most wheels 18 inch and larger. Because Baer cannot guarantee wheel fit across every style, the Q082P template should be laid against your wheel before installation. Fitment details follow below.
Key features
- Red six-piston fixed caliper with staggered pistons for more even pad wear
- Stainless pistons, abutments and noise suppression clips
- Dual seals against dust, weather and pressure
- Slotted, drilled, zinc-plated two-piece rotor on a billet aluminum hat
- Backing plate doubles as caliper mount and park brake shoe housing
- Stainless braided hoses with hardware come in the kit
- Manufactured in Phoenix, Az from US-sourced forged or billet aluminum, powder coated
Rear brake service
A red six-piston caliper on a rear axle is serviced the same way as other fixed calipers, but the backing plate adds a step. The park brake shoe sits inside the plate, so pad and rotor work should begin with the shoe clearance and the adjuster in view. Keep the caliper bolts clean and check their seating after the first few drives.
Hydraulic work should always be followed by a bleed and a pedal check. Trail use exposes braided hoses to rock contact and heat, so look over the hose runs at every service. A rear brake that pulls to one side often traces back to a sticking piston, a collapsed hose or uneven pad wear.
- Check the park brake shoe adjustment at each service
- Bleed the system after any hose or caliper change
- Inspect hose runs for rock damage after trail use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262197R |
| UPC | 844165037200 |
| Caliper | 6-piston (6P), fixed, red |
| Pad type (FMSI) | D0731 |
| Rotor type | 2-piece, slotted, drilled, zinc-plated |
| Rotor material | Iron with aluminum hat |
| Rotor construction | Vented |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Minimum wheel diameter | 18.0 inch |
| Wheel bolt pattern | 5 lug, 5×5.00 inch |
| Axle flange | Ford 9 inch Torino/late big bearing |
| Template | Q082P |
| Hose material | Steel braided, DOT approved |
| Park brake | Included (one-piece shoe assembly in backing plate) |
| Park brake cables | Not included |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It fits Ford 9 inch rear axles with Torino (late big) bearing housing ends, a 5×5.00 inch bolt pattern and a minimum wheel diameter of 18.0 inch. Confirm fit for your vehicle’s year, model and trim before ordering.
The Torino bearing flange is the only flange this kit describes, so axles with other flanges fall outside its scope. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables must be obtained separately before the park brake shoe can be used. Rotors come pre-assembled with stainless hardware, and braided hoses are supplied. Rear brake work is best handled by someone comfortable with Baer’s backing plate design.
What’s included
Six-piston red caliper, pre-assembled two-piece rotor with stainless hardware, backing plate with park brake shoe assembly, and stainless braided hoses with hardware.
Not included: park brake cables, lug nuts and the front rotor.















