Overview
Baer Brakes’ Extreme rear kit in red, part number 4302136R, adds a six-piston 6S caliper and a 14-inch slotted, drilled rotor to rear disc brakes on GM 1500 trucks and SUVs. The kit is meant for trucks from 1999 to 2019 and SUVs from 2000 to 2020 that have a manual park brake.
The red caliper is a one-piece monoblock design with stainless steel pistons, abutments and clips arranged in a staggered layout that helps even out pad wear. It is machined in Phoenix, AZ, from 2618 aluminum forging. Silverado, Sierra, Tahoe, Yukon, Suburban, Avalanche and Escalade vehicles are covered.
Key features
- Powder coated red one-piece monoblock caliper carrying six pistons
- Stainless steel pistons paired with stainless abutments and noise suppression clips
- Staggered piston layout intended to even out pad wear
- Dual dust/weather and pressure seals
- Slotted and drilled zinc-plated rotor, 14 inches, with billet aluminum hat
- Compatible with the D1247 pad type
- Brackets and hardware are part of the kit
- Minimum wheel diameter 18.0 inches
Red finish and caliper care
Powder coated calipers keep their color best when they are kept clean. Road salt and brake dust can dull the finish over time, so rinse the caliper and wheel area after winter driving. Avoid abrasive pads on the coating, because scratches expose the aluminum body to moisture.
Rear pads and rotors wear at different rates depending on how a truck is used. Towing and hard stops heat the rotor faster, which can leave a blue tint or small cracks. When a rotor is replaced, the pads are usually checked and replaced at the same time to keep contact even.
- Clean the caliper body with mild soap and water
- Check the rotor for heat spots or grooves
- Keep the park brake cable free of rust
- Replace pads once they reach their minimum thickness
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302136R |
| UPC | 844165042679 |
| Sold as | Kit |
| Axle | Rear |
| Caliper | 6S, one-piece monoblock, six pistons, floating |
| Caliper color | Red |
| Caliper finish | Powder coated |
| Rotor outside diameter | 14.0 inches |
| Rotor thickness | 1.15 inch |
| Rotor type | 1-piece |
| Rotor style | Vented, slotted, drilled |
| Rotor material | Iron with aluminum hat, zinc plated |
| Pad type | D1247 (FMSI) |
| Wheel bolt pattern | 6×5.50 |
| Lug count | 6 lug |
| Minimum wheel diameter | 18.0 inches |
| Template | N228P |
| Emission code | 6 |
| Grade | Performance |
| Hose | Re-uses OE |
| Park brake | Manual park brake; park brake hardware not included |
| Country of origin | US |
Vehicle fitment
Red rear kits cover 1999–2019 GMC Sierra 1500, 1999–2019 Chevrolet Silverado 1500, 2000–2020 Chevrolet Tahoe, 2000–2020 GMC Yukon, 2002–2020 Cadillac Escalade, 2003–2020 Cadillac Escalade ESV, 2002–2013 Cadillac Escalade EXT, 2007–2013 Chevrolet Avalanche, 2002–2006 Chevrolet Avalanche 1500, 2015–2020 Chevrolet Suburban, 2000–2014 Chevrolet Suburban 1500, 2015–2020 GMC Yukon XL and 2000–2014 GMC Yukon XL 1500.
Front axles are not covered by this rear kit, and the list ends with 2020 model years, so newer GM trucks and SUVs are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The supplied brackets and hardware handle the caliper mount, and the factory hoses are re-used. The park brake hardware is not part of the kit, so existing park brake components stay in use. Measure your wheels against the N228P template first, since the minimum wheel diameter is 18.0 inches.
What’s included
Included are the red 6S caliper, the 14-inch rear rotor, brackets and mounting hardware.
Not included: lug nuts and park brake hardware.














