Overview
The 4261049S is a front Extreme brake system from Baer Brakes, finished in silver and built for the two-wheel-drive version of the 2004–2008 Ford F-150. The core is a 1-piece Monoblock 6-piston 6S caliper paired with a 15-inch slotted, drilled rotor that has a zinc-plated surface.
This kit is set up for 2WD trucks and includes the caliper, rotor, mounting brackets and hardware. The pads are the D1247 type, and the original hoses are re-used. The 15-inch Extreme is intended for wheels 19 inches or larger.
Key features
- Front-axle kit with 1-piece Monoblock 6-piston 6S caliper
- U.S.-sourced 2618 aluminum forging, CNC machined
- Powder-coated silver finish
- Pistons and abutments in stainless steel, plus noise suppression clips
- Staggered pistons help even out pad wear
- Dual dust, weather and pressure seals
- Slotted, drilled and zinc-plated 1-piece rotor
- Original equipment hoses are re-used
Things to check
Bleeding the brakes after any hose or caliper work removes trapped air, which can make the pedal feel soft. The procedure works best with a helper and a clean bleed tool. Keep the fluid sealed, since open containers absorb moisture from the air over time.
Before the pads go in, look at the rotor. Light surface rust on the braking face usually wears off within the first few stops, but deep grooves or a lip at the edge mean the rotor should be replaced. Clean the caliper bracket and slide surfaces so the pads move freely and wear evenly.
- Clean the hub face before mounting the rotor
- Torque lug nuts in a star pattern
- Check pedal feel before driving on public roads
- Keep spare brake fluid sealed and dry
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261049S |
| UPC | 844165035121 |
| Sold as | Kit |
| Axle | Front |
| Drive | 2WD |
| Caliper | 6S, 1-piece Monoblock, 6-piston, fixed |
| Caliper color | Silver |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.18 |
| Rotor construction | 1-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron |
| Front rotor included | Yes |
| Pad type (FMSI) | D1247 |
| Minimum wheel diameter | 19.0 inch |
| Lug count | 6 lug |
| Bolt pattern | 6x135mm |
| Template | N063U |
| Hose | Re-uses OE hoses |
| Emission code | 6 |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
This kit fits the 2004–2008 Ford F-150 in 2WD. The application reads Ford F150 04-08 with Drive 2WD.
Four-wheel-drive F-150 trucks use the 4WD kit, which carries a different part number, and other Ford models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wheel fitment is the first thing to check. The minimum wheel diameter is 19.0 inch, so lay the N063U template against the wheel before the kit goes on the truck. Fit lug nuts that suit the 6x135mm pattern, because they are not part of this package. Brake hydraulics call for trained hands, so an experienced shop should bleed the system.
What’s included
This 2WD package contains the silver 6S Monoblock caliper, the front 15-inch rotor, mounting brackets and hardware.
Not included: Lug nuts.














