Overview
The Baer Brakes 31265-020 is a set of two front Claw performance rotors for the 1998 to 2007 Toyota Land Cruiser and Lexus LX470 with 4WD. Every rotor in this set is a one-piece, fully cast direct replacement for the original front disc, with 5 studs on a 144 bolt hole circle diameter.
Baer Brakes positions the Claw design as a way to improve braking feel and appearance on these vehicles. The cross-drilled and slotted friction surface gives gas and dust a route out from between pad and rotor, which the brand ties to a more consistent pedal and less brake fade. The chamfered cross-drilled holes are meant to limit stress cracking, and the zinc-plated finish suits open center wheels.
Key features
- Cross-drilled and slotted face that lets gas and dust escape from under the pad
- Vane structure designed to aid cooling and durability.
- Mill balanced, premium direct replacement design
- Chamfered cross-drilled holes against stress cracking
- Zinc-plated finish suited to open center wheels
- Sold as a set; the ABS tone ring is not part of the kit
Towing and heavy loads
Land Cruisers and LX470s are heavy vehicles, so their front brakes do a large share of the work on long descents and when towing. A rotor that is sound and correctly seated keeps the pedal predictable under those loads. Brake fluid also matters here, because fluid that has absorbed moisture can boil and cause fade even when the rotors are in good condition.
The ABS tone ring sits on the hub and supplies wheel speed information to the anti-lock system, so a damaged ring can trigger warning lights or erratic ABS action. Inspect it while the rotor is off. Keep the hub mating surface clean, since rust or debris can leave the rotor wobbling and cause pulsation.
- Change brake fluid on the interval given in your owner’s manual
- Inspect the wheel bearing for play while the hub is exposed
- Check brake hoses for cracks or bulging
- Use new hardware when fitting a new rotor
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 31265-020 |
| UPC | 844165006923 |
| Axle | Front |
| Construction | One piece, full cast |
| Material | Cast iron |
| Rotor type | Vented, directional brake surface |
| Surface type | Slotted and drilled |
| Disc finish | Zinc plated |
| Grade type | Premium |
| Stud/lug hole quantity | 5 |
| Mounting bolt hole circle diameter | 144 |
| Outside diameter | 312.93 |
| Overall height | 70 |
| Discard thickness | 29.9 |
| ABS tone ring included | No |
| Sold as | Set |
| Country of origin | CN |
Vehicle fitment
Both fit models have 4WD. The Lexus LX470 fits from 1998 to 2007 on vehicles with 12.3 inch front rotors, and the Toyota Land Cruiser fits from 1998 to 2007.
Not covered: 2WD versions of these models, and any Toyota or Lexus model or year outside 1998 to 2007, including later Land Cruiser and LX models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No ABS tone ring comes with these rotors. Confirm that the existing tone ring on your hub is in place and undamaged before fitting the new rotors. Bed in new pads using the procedure supplied with those pads after installation. Run a low-speed test stop series before normal driving.
What’s included
A pair of front Claw performance rotors, sold as a set.
Not included: ABS tone ring.
