Overview
The Assault Industries helmet and headset hanger (part ASI101005MA202) is a cage-mounted clamp that holds a helmet or headset when it is not in use. The product name gives a 1.75 in. clamp size.
The clamp is machined from aerospace grade 6061 T6 billet aluminum and hard anodized with a black e-coat, designed to resist fading. Clamp sizes available are 1.5, 1.75, 1.875 and 2 in.
Key features
- Cage-mountable clamp
- Aerospace grade 6061 T6 billet aluminum
- Hard anodized with a black e-coat
- Finish designed to resist fading
- Flat on one side for mounting under the roof skin
Helmet storage in the cage
A cage clamp needs to fit the tube it grips snugly, so measure the tubing diameter before ordering and confirm the clamp size matches. A loose clamp lets the hanger rotate and can scuff the tube, while an overtight one can crush thin wall tubing. Use the included hardware and tighten in steps, then recheck after the first few trail sessions.
Helmets and headsets are best stored out of direct sun, since dark trim can heat up quickly under the roof. Keep the hanger free of sharp edges that might snag a strap, and check the e-coat for chips where the clamp contacts the cage. Chipped black finish can be touched up to slow corrosion on the aluminum beneath.
- Measure cage tubing before choosing a clamp size
- Tighten fasteners in steps
- Touch up chipped e-coat where the clamp contacts the cage
Specifications
| Brand | Assault Industries |
|---|---|
| Part number | ASI101005MA202 |
| Clamp size (product name) | 1.75 in. |
| Available sizes | 1.5 in., 1.75 in., 1.875 in., 2 in. |
| Material | 6061 T6 billet aluminum |
| Finish | Hard anodized with black e-coat |
Vehicle fitment
It mounts to a roll cage, so choose the clamp size that matches the cage tubing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The clamp is flat on one side so it can be mounted to the cage under the roof skin. Installation hardware is included.
What’s included
One clamp and the installation hardware.
