Overview
These are round convex side mirrors with a 1.75-inch clamp size, part number 101005SM07212, and they offer an enhanced field of view. They are constructed primarily from CNC machined 6061 T6 billet aluminum.
The mirrors can be mounted with a clamp of 1.5, 1.75, 1.875 inches (for Can-Am Maverick X3) or 2 inches, or with a custom mount. They are used on UTVs, off-road race trucks and Jeeps.
Key features
- Convex mirror for an enhanced field of view
- Round design that the brand says is highly customizable
- CNC machined 6061 T6 billet aluminum
- Front and rear bezels can be replaced
- Rebuildable with basic tools
Rebuilding and maintaining side mirrors
A side mirror on a UTV or off-road truck takes constant vibration and occasional impacts, so periodic checks keep it useful. Start with the clamp bolts and the mount tube, since a loose clamp lets the head rotate and changes the view. After rough runs, look at the glass for chips and the bezels for cracks. A rebuildable design makes it practical to replace a worn glass or bezel rather than the whole assembly.
When rebuilding, keep the threads clean and use fresh hardware where the old pieces are damaged. Aluminum parts can corrode where they touch dissimilar metals, so a thin coat of protective compound at contact points helps. Re-check the mounting after the first few trail runs, because settling and vibration can loosen fasteners that were tight at installation.
- Check clamp bolts after rough runs
- Replace damaged glass or bezels rather than the whole mirror
- Inspect contact points for corrosion
Specifications
| Brand | Assault Industries |
|---|---|
| Part number | 101005SM07212 |
| Mirror type | Convex, round |
| Material | 6061 T6 billet aluminum, CNC machined |
| Clamp sizes | 1.5, 1.75, 1.875 (Can-Am Maverick X3) and 2 inches |
| Bezels | Front and rear, replaceable |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Match the clamp size to the roll cage or mount tube on your vehicle before installing.
Installation notes
Choose the clamp that matches your mount tube, or use a custom mount. The mirror can be rebuilt with basic tools, and the bezels can be swapped for colored ones or finished by hand.
What’s included
Check the clamps you receive against your mount tube before installing.









