Overview
The Assault Industries Sidewinder convex side mirrors, raw finish with a 1.875 inch clamp, part number ASI101005SM07214, are round billet aluminum side mirrors for UTVs, off-road race trucks and Jeeps.
The convex Sidewinder mirrors have an enhanced field of view and a round design. They are constructed primarily from CNC machined 6061 T6 billet aluminum and are completely rebuildable with basic tools. The front and rear bezels can be replaced with available colored bezels, or the raw bezels can be finished by the owner.
Key features
- Convex mirror glass for an enhanced field of view
- Round design that is highly customizable
- CNC machined 6061 T6 billet aluminum
- Completely rebuildable with basic tools
- Replaceable front and rear bezels
- 1.875 inch clamp, used on the CanAm Maverick X3
- Raw finish
- Mounts with 1.5, 1.75, 1.875 or 2 inch clamps, or can be custom mounted
Mounting on rough terrain
Side mirrors on UTVs and race trucks live in a harsh environment, with dust, branches and vibration working on every joint. A clamp that grips the tube evenly holds the head steady, while an uneven grip can let the mirror rotate after a few jolts. Matching the clamp diameter to the tube is the first step, and a custom mount is a practical option when the tube size is unusual.
Aluminum handles weather well but can still corrode where it contacts steel, so isolating those contact points with a thin layer of compound helps. Routine checks should include the mount, the head pivot and any bezel screws. If the mirror starts to buzz or drift at speed, tighten the clamp before adjusting the glass, since the mount is the usual cause.
- Match the clamp diameter to the tube
- Use isolating compound at steel contact points
- Tighten the clamp before adjusting the glass
Specifications
| Brand | Assault Industries |
|---|---|
| Part number | ASI101005SM07214 |
| Product type | Side mirrors (convex) |
| Series | Sidewinder |
| Clamp size | 1.875 inch |
| Finish | Raw |
| Material | CNC machined 6061 T6 billet aluminum |
| Mirror type | Convex |
| Universal fit | Universal fit |
Vehicle fitment
No vehicle list is provided for these Sidewinder mirrors. Assault Industries says they are compatible with a wide variety of vehicles and are used on UTVs, off-road race trucks and Jeeps, and the manufacturer data lists them as universal fit. The clamp must match the roll bar or tube it mounts to.
It has a 1.875 inch clamp and is used on the CanAm Maverick X3. Other clamp sizes are available separately. Measure the tube you plan to mount to, and confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the part before any cutting, drilling or finishing. Tighten fasteners to the torque values for your hardware and re-check them after the first miles of driving. If the part needs cutting or drilling, use appropriate eye protection and treat bare edges to prevent corrosion. Check local regulations on vehicle modification. Make sure every fastener is tight and the part is secure before it carries any load.
What’s included
Sidewinder convex side mirrors with a 1.875 inch clamp in raw finish. Check the quantity and hardware against your installation before starting.
Not included: Colored bezels and other clamp sizes, which are available separately.









