Overview
The Trail Gear Longfield axle in the inner long length, part number TGI301707-1-KIT, has 27 splines. It is a direct fit for the 1979–1985 Toyota Pickup and the 1984–1985 Toyota 4Runner.
The length is inner long, and the 27-spline count is the other specification the brand gives. Compare both against the axle you are replacing before ordering, because no other measurements are published for this part.
Key features
- 27 splines
- Inner long length
- Longfield axle design from Trail Gear
- Direct fit for the listed Toyota models
Axle replacement basics
An axle shaft carries power from the differential to the wheel hub, so its condition affects how the drivetrain behaves under load. Worn or twisted shafts often show up as clicking in turns, vibration at speed or a wheel that wobbles on the hub. When a new axle is fitted, the splines have to engage cleanly at both ends, and the retaining hardware and seals should be inspected at the same time.
Fitting a longfield style axle usually calls for checking bearing and seal condition, the differential fluid level and the brake components that sit near the hub. Inspect the spline ends for wear before installing, and keep the joints clean and greased where the design needs it. After the first drives, check for leaks and listen for new noises, since a loose retainer can let the shaft move out of place.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI301707-1-KIT |
| Axle type | Longfield |
| Spline count | 27 splines |
| Length | Inner long |
| Fit type | Direct fit |
Vehicle fitment
The vehicles covered are the 1979–1985 Toyota Pickup and the 1984–1985 Toyota 4Runner. Years outside those ranges are not covered.
Confirm your vehicle’s year, model and trim before ordering.









