Overview
The Aries Offroad ARS2074113 is a black Rocker Step running board, also called a side step, for 2019-2026 Chevrolet Silverado and GMC Sierra pickups in the 1500, 2500 HD and 3500 HD lines.
Rocker Step boards give a solid step up into the cab and add side protection for the rocker panels against scuffs, scratches and dents on the trail. The design also offers ground clearance for rough terrain.
The boards suit owners who want protection and secure footing on a lifted or high-clearance truck, with a double-tube design, an all-steel welded body and a no-drill fit that bolts onto the sides of the vehicle. Aries Offroad markets them for trucks, Jeeps and SUVs, but the fitment below covers only the Silverado and Sierra models and years listed.
Key features
- Double-tube configuration for a solid step up into the vehicle
- 3-inch wide welded top plate for reliable footing on the trail
- Aggressive cutout pattern lets dirt and debris pass through, keeping the steps and the cab interior cleaner
- Highly textured finish for non-skid grip with boots
- All-steel, fully welded construction for maximum strength
- No-drill custom fit that bolts onto the sides of the vehicle
- Extra side protection for the rocker panels against scuffs, scratches and dents
Choosing and maintaining side steps
Side steps on a lifted or high-clearance pickup do two jobs. They make the cab easier to reach, which matters more as ride height goes up, and they take the first contact when the truck slides onto a rock or stump. Because the rocker area sits low, a step that is mounted solidly and kept clear of debris protects more of the body than a loose one. Mud and grit often pack the gap between the step and the rocker, so a quick look after each trail run is worth the time.
Bolt-on steps are only as good as their fasteners. Check the mounting points after the first few trail runs, since vibration and flex can loosen hardware on any no-drill setup. Look for cracks at the welds, bent tube sections and paint chips that expose bare steel, because surface rust often starts there. Larger tires or a lift change clearance, so confirm the step still sits clear of the wheel at full suspension compression.
- Re-check mounting bolts after the first few trail outings
- Inspect welds and tube ends for cracks or bends
- Touch up chipped paint on exposed steel
- Clear packed mud from behind the step
Specifications
| Brand | Aries Offroad |
|---|---|
| Part number | ARS2074113 |
| Product type | Rocker Step running board (side step) |
| Finish | Black, highly textured non-skid surface |
| Construction | All-steel, fully welded |
| Tube design | Double-tube configuration |
| Top plate width | 3 inches, welded |
| Step pattern | Aggressive cutout pattern |
| Mounting | No-drill custom fit, bolts onto the sides of the vehicle |
| Fitment type | Direct fit |
Vehicle fitment
Fitment is listed by the manufacturer for the following vehicles and trims:
- Chevrolet Silverado 1500, 2019-2021: Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV, WT
- Chevrolet Silverado 2500 HD, 2020-2026: Custom, High Country, LT, LTZ, WT
- Chevrolet Silverado 3500 HD, 2020-2026: High Country, LT, LTZ, WT
- GMC Sierra 1500, 2019-2021: AT4, Base, Denali, SLE, SLT
- GMC Sierra 2500 HD, 2020-2026: AT4, Base, Denali, SLE, SLT
- GMC Sierra 3500 HD, 2020-2026: AT4, Base, Denali, SLE, SLT
Silverado 1500 and Sierra 1500 model years outside 2019-2021, including 2022 trucks and earlier generations, are not covered, and other GM models such as the Colorado and Canyon are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Rocker Step uses a no-drill custom fit and bolts onto the sides of the truck, so the body does not need to be drilled. Check that the steps are fully tightened and clear the rocker panel before driving off-road.
What’s included
Confirm the box holds the mounting parts before you start the installation.













