Overview
The Body Armor 4×4 RockCrawler Side Guards, part number B/ATJ-4121, are tubular rock sliders, also called side guards, for the 1997–2006 Jeep Wrangler TJ. Body Armor describes them as a double-tube, no-drill, bolt-on guard that mounts to the chassis for wheel well to wheel well protection.
The main tube is a 2 x 3 enclosed rectangle with tapered and welded ends, and a 1.5 x .140 wall kick-out tube adds protection for rough use. The wall thickness is 3/16, with a 4-mil black powder coat finish and UV protector.
Key features
- Double-tube design
- 2 x 3 enclosed rectangle main tube with tapered, welded ends
- Additional 1.5 x .140 wall kick-out tube
- Bolt-on chassis mount
- No cutting or drilling required
- Black powder coat with UV protector
Rock guard care and upkeep
Tubular rock guards take the impact that would otherwise reach the rocker and lower body, so their condition matters after every hard trail day. A double-tube design spreads contact over more surface, but the welded ends and bolt points still carry the load. Check the chassis mounts and frame contact points after rough runs, because a loose guard can rub or shift under flex.
Ground clearance is the trade-off. Guards sit low, and on a Wrangler with larger tires they can change how the truck clears a ledge. Look at the tire and suspension clearance before heavy use, and keep the body-side hardware snug. If the powder coat chips, clean the spot and touch it up early to slow surface rust on the tube.
- Inspect chassis mounts after rough runs
- Check welded ends for cracks
- Touch up chips on the powder coat
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | B/ATJ-4121 |
| Product type | Tubular guard with tubular standoff |
| Main tube | 2 x 3 enclosed rectangle |
| Wall thickness | 3/16 |
| Kick-out tube | 1.5 x .140 wall |
| Finish | Gloss black (attribute); 4-mil black powder coat (description) |
| Installation | No cutting or drilling required; bolt-on chassis mount |
Vehicle fitment
The guards fit the 1997–2006 Jeep Wrangler TJ in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
The list does not include the Wrangler YJ, JK or JL, or the Jeep Cherokee or Liberty. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No cutting or drilling is required, because the guards bolt onto the chassis. Support the vehicle on level ground before you work underneath it.
What’s included
RockCrawler side guards with the tubular standoff design.
Not included: Look over the package contents against your installation before the first fitting.









