Overview
The ARB JT Rock Sliders, part number 4450260, are formed plate rock sliders designed for the Jeep Gladiator JT. ARB built them to protect the vulnerable lower sill area of the JT when the vehicle is used off road, and they are finished in a textured matte black.
The guard has two main parts: a multi-folded slider assembly and a lower body mount. The body mount attaches to the chassis and spreads the load along the length of the sills. The design does not restrict breakover angle, and the slider has a curved profile that follows the shape of the body.
Key features
- Slider assembly and lower body mount that spread the load along the sills
- Multi-folded 4mm laser cut and pulse welded sheet steel slider
- Curved slider profile matched to the body shape
- Sill plate fitted with M6 nutserts and M6 zinc-plated Torx button head bolts
- Sill plate made from 3mm laser cut and folded sheet steel with a laser cut ARB logo
- Textured matte black Integrit powder coat finish
- No cutting or drilling required
Gladiator sill protection and fasteners
On a Gladiator the sill sits low and takes hits from rocks and ledges. A formed plate guard spreads those impacts along the length of the sill, and a lower body mount keeps the slider from pushing inward. Because the guard relies on its mounts and fasteners, those connections need as much attention as the steel itself.
Check the M6 fasteners regularly, especially after the first run off road, since vibration and heat cycles can loosen them. Look at the nutserts and sill plate for bending or cracking, and touch up any scraped coating so corrosion does not start under the finish. If you change tires or fit a lift, recheck how the guard sits against the sill.
- Confirm fastener tightness before each season
- Inspect nutserts for pull-through
- Touch up coating chips early
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 4450260 |
| Type | Formed plate guard |
| Slider material | Multi-folded 4mm laser cut and pulse welded sheet steel |
| Sill plate material | 3mm laser cut and folded sheet steel |
| Sill plate fasteners | M6 button head zinc-plated Torx bolts |
| Sill plate inserts | M6 nutserts |
| Finish | Textured/Matte Black, Integrit powder coat |
| Installation type | No cutting or drilling required |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2020–2026 Jeep Gladiator (JT) in 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
It is made for the 2020–2026 Jeep Gladiator (JT) in several trims, and Wrangler models, including the JL, are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The guard bolts on without cutting or drilling. Check that the body mount and sill plate sit flat against the sill before final tightening, then recheck the M6 fasteners after the first off-road run.
What’s included
The package includes the slider assembly, the lower body mount and a sill plate fitted with M6 nutserts and M6 bolts. Check the contents against your installation before fitting.















