Overview
The ARB 4×4 Accessories Rock Sliders, part number 4450210, are satin black tubular rock sliders for the Jeep Wrangler JK body, four-door models. They are a bolt-on protection solution that guards the rocker area of the vehicle when it runs over trail obstacles.
Rock sliders are side guards that run along the rocker area beneath the doors. These ARB sliders attach entirely to factory-drilled holes in the chassis and the rear lower control arm hangers. ARB says connecting directly to the chassis gives the strongest mount possible, and that using the rear lower control arm hanger as a mounting point also strengthens the chassis and rear suspension for improved off-road use.
If you run a Wrangler JK four-door on rocky trails, the sliders place a protective bar where rocks and ledges meet the body, with the mounting points built into the existing factory holes.
Key features
- Internal mandrel bent tubular design
- Australian 250 grade mild steel tubing, 2.4 inch OD and .25 inch thick
- Satin black powder coated finish
- Mounts entirely to factory-drilled holes in the chassis and rear lower control arm hangers
- No cutting or drilling required
- Direct fit, bolt-on protection for the JK body
- Mounting hardware and instructions included
Protecting the rocker on the trail
On rocky terrain the rocker area takes repeated hits from ledges and boulders. A tubular rock slider spreads that impact along the side of the vehicle, so the door sills and body are less likely to be dented. The tube is only part of the system, though; the mounts and hardware carry the load into the chassis and rear suspension.
After the first trail runs, look at the tube for dents, check the powder coat around the mounts, and make sure the hardware is still tight. Chips in the coating are easy to touch up before rust starts. If you change tires or add accessories that alter how the rear suspension moves, recheck the mounts and clearance.
- Inspect tubes for dents after rough runs
- Touch up coating chips with matching paint
- Recheck mounts after changing tires or accessories
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 4450210 |
| UPC | 9332018006530 |
| Type | Tubular guard (rock slider) |
| Material | Australian 250 grade mild steel tubing |
| Tubing outside diameter | 2.4 inch |
| Tubing thickness | .25 inch |
| Finish | Satin black powder coat |
| Installation type | No cutting or drilling required |
| Fitment | Direct fit |
| Included | Mounting hardware and instructions |
Vehicle fitment
These sliders are made for the Jeep Wrangler JK body in four-door models. They mount to the factory-drilled points on the chassis and rear lower control arm hangers.
Other models, including the JL generation Wrangler, the Gladiator (JT), and the earlier TJ and LJ Wranglers, fall outside this kit’s fit. Check the year, model and trim against your vehicle before ordering.
Installation notes
The sliders bolt to the factory-drilled holes in the chassis and the rear lower control arm hangers, so no drilling is needed. Line each mount up with its existing hole and follow the included instructions. Because the sliders tie into the chassis and rear suspension, check that all hardware is tight before taking the vehicle off-road.
What’s included
Mounting hardware and instructions are included with the rock sliders.












