Overview
The SRC rocker guard in light texture black (part 76645LT) is made for the 2-door Jeep Wrangler JK from 2007 to 2018. It is built from heavy-duty 2 inch E-coated powder coat steel tube with an upper tube for side protection. A perforated filler plate and 3/16 inch protective plating add to the coverage.
The guard is built from heavy-duty 2 inch E-coated powder coat steel tube with an upper tube for side protection. A perforated filler plate and 3/16 inch protective plating add to the coverage.
Key features
- Light texture black finish
- Heavy-duty 2 inch steel tubing
- Upper tube for side protection
- Perforated filler plate
- 3/16 inch protective plating
- No cutting or drilling required
Fit checks for the JK body
The JK body has a rocker that flexes with the frame, so a side guard has to tolerate movement without rubbing. An upper tube adds protection along the side, while the filler plate closes the gap between the tube and the body. Before tightening, confirm that both pieces clear the body and the door hinge area.
Light texture finishes show less wear than glossy paint, but they still chip under rock contact. Check the coating after each trail outing and touch up bare steel with a matching primer and paint. Plating adds protection at the points most exposed to impact, so keep it clean of grit that can trap moisture.
If you run larger tires or a lift, recheck the clearance at the wheel opening and along the upper tube, since a different ride height changes where the guard sits relative to the rocker. Loose fasteners are the most common early problem, so retighten them after the first drives.
- Confirm upper tube clearance at the body
- Check the filler plate after trail use
- Touch up scrapes on the light texture finish
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76645LT |
| UPC | 631410137248 |
| Tube size | 2 inch steel tubing |
| Finish | Light texture black powder coat |
| Protective plating | 3/16 inch |
| Body style | 2-door models |
| Installation | No cutting or drilling required |
Vehicle fitment
The guard fits the 2-door Jeep Wrangler JK from 2007 to 2018. Check that your Wrangler is a JK, and that the guard lines up with the rocker on your vehicle.
Installation notes
The guard needs no cutting or drilling. Check the mounting points on the rocker, and confirm the upper tube and filler plate clear the body before tightening.
What’s included
One SRC rocker guard in light texture black with its upper tube and perforated filler plate.






















