Select your vehicle

ARB Old Man Emu Nitrocharger Sport Front Shock Absorber – 60151

ARB 4x4 Accessories

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front Nitrocharger Sport shock absorber for the Jeep Wrangler JL Sport and Rubicon
  • For 90 mm (Sport) and 65 mm (Rubicon) lifts
  • Open length 720 mm (Sport) or 675 mm (Rubicon), closed length 445 mm
  • Requires FK92 and FK93 kits

Description

Overview

The ARB Old Man Emu Nitrocharger Sport Front Shock Absorber, part number 60151, is a twin-tube front shock for the Jeep Wrangler JL Sport and Rubicon. It fits 2018–2026 Wrangler JL models in the Rubicon, Sport and Sport S trims, 2-door and Unlimited 4-door, plus the Unlimited Moab and Unlimited Sahara.

The shock is sized for a 90 mm lift on the Sport and a 65 mm lift on the Rubicon. It needs the FK92 bump stop kit and the FK93 kit fitted with it.

Two bump stop kits are required with this shock. FK92 stops the shock from going solid and allows larger tires to be fitted. FK93 lets the shock extend freely without limit or contact. Without FK92 the shock can go solid, and without FK93 it cannot extend fully, so order both kits with the shock.

Key features

  • Twin-tube front shock absorber
  • Sport version for a 90 mm lift, Rubicon version for a 65 mm lift
  • Open length 720 mm (Sport) or 675 mm (Rubicon)
  • Closed length 445 mm

Lift height and travel

Shock length and travel have to match the lift height. A longer shock is needed for more lift, and a shock that is too short for the new ride height will limit droop or compression. The extension and compression limits set how far the suspension can move before the shock reaches its end stops, so the bump stops matter as much as the damper itself.

Larger tires add weight and change front geometry, so they are often part of the same upgrade. Check brake hose length, steering clearance and the shock’s full travel after installation. Test the front end at low speed before any hard driving, and listen for contact at full steering lock.

  • Measure installed length before fitting
  • Check brake hose routing after lift
  • Recheck bump stop clearance after tire changes
  • Replace worn bump stops with the shock

Specifications

Brand ARB 4×4 Accessories
Part number 60151
Shock series Nitrocharger Sport
Location Front
Shock type Twin tube
Open length 720 mm (Sport), 675 mm (Rubicon)
Closed length 445 mm
Charge Gas charged

Vehicle fitment

It fits the 2018–2026 Jeep Wrangler JL in the Rubicon, Sport and Sport S trims, 2-door and Unlimited 4-door, plus the Unlimited Moab and Unlimited Sahara.

Wrangler JK and earlier models do not fit. The JL Willys and other JL trims are not covered, so check your year, model and trim against the fitment before ordering.

Installation notes

Fitting the FK92 bump stop kit is mandatory, because it stops the shock from going solid and is needed for larger tyres. Fitting the FK93 kit is also mandatory, since it lets the shock extend freely without limit or contact. Match the lift height to the Sport or Rubicon version before you install.

What’s included

Sold individually: one front shock per order.

Not included: The FK92 bump stop kit and the FK93 kit, both of which ARB says are mandatory with this shock.

Fitment

VehicleYearsTrims
Jeep Wrangler (JL)2018–2026Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the ARB 60151 fit a 2018–2026 Jeep Wrangler JL?

It fits the JL in the Rubicon, Sport and Sport S trims in 2-door and Unlimited 4-door form, plus the Unlimited Moab and Sahara. Check your year, model and trim before ordering.

What lift height is this shock for?

The Sport is designed for a 90 mm lift and the Rubicon for a 65 mm lift. The open length is 720 mm on the Sport and 675 mm on the Rubicon.

Does this shock work without the FK92 and FK93 kits?

ARB says both FK92 and FK93 are mandatory with this shock. ARB says FK92 keeps the shock from going solid and allows larger tyres, and FK93 lets the shock extend freely without limit or contact.

Can I run this shock without the bump stop kits?

Not as intended. The shock can go solid without FK92, and without FK93 it cannot extend fully. Order both kits with the shock so the front suspension works within its travel.

How do I know the shock is at the right length?

Compare the installed length with the lift height and check that the suspension moves through its full travel without contact. Look for hose tension at full droop and clearance at full compression.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon