Overview
The ARB CS001F is an Old Man Emu load leveling leaf spring from ARB 4×4 Accessories, part number CS001F. It has a two-stage leaf pack, so the primary stage carries the vehicle when unladen and the secondary stage adds support under a heavy load. Confirm fit for your vehicle before ordering.
The leaves are draw tapered and diamond cut, which spreads the load over a larger area and reduces the stress that builds at the leaf ends. Each spring is fully scragged and load tested, and the leaves are graphite coated to reduce friction between them. The tension side of every leaf is shot peened, a process ARB says can double the life of a spring.
In a leaf spring, the leaves slide against one another as the axle moves up and down, so friction between them affects how the spring feels and how it wears. The graphite coating, the regreasable nylon liners at the tips and the scragging all address that friction and the set of the spring over time.
Key features
- Draw tapered and diamond cut leaves distribute the load progressively and reduce stress at the leaf ends.
- Scragging sets the spring permanently, which reduces sagging, and each spring is load tested.
- Graphite coating lowers friction between the spring leaves and their friction pads.
- Regreasable nylon interleaf liners cut friction at the leaf tips, where the load is greatest.
- A military wrap on the spring eye is designed to add safety.
- A flat axle seat area gives a positive axle mount and reduces spring stress.
- Shot peening on the tension side of every leaf reduces stress in the steel.
Load leveling basics
A load leveling leaf spring is built to hold the rear of a truck at a steadier height when the bed or trailer hitch is loaded. Compared with a single-stage spring, the two-stage design lets the vehicle ride softly when empty and stiffen when weight is added. Its effect depends on the axle, shackles and bump stops that come with the rest of the rear suspension.
Leaf springs wear at the leaf tips, eye bushings and center bolt, and friction between leaves changes how the spring feels over time. Regreasing the liners at the maintenance interval helps reduce noise and stress. Inspect for broken leaves, a sagging rear corner or cracked eyes before fitting a new spring, and replace worn shackle bushings at the same time.
- Check for broken or cracked leaves
- Inspect shackles and eye bushings for wear
- Measure ride height on both sides before and after fitting
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS001F |
| UPC | 700003292131 |
| Type | Load leveling leaf spring |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
| Coating | Graphite on leaves |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, since the spring must match the axle and mounting points.
What’s included
One leaf spring. Confirm what comes with the spring before fitting it to the axle.



