Overview
The ARB Old Man Emu Coil Trim Packer, part number OMELRCP1, is an 8 mm steel packer for the front coil seat of the Land Rover Discovery. It fits the 1999 Discovery (SD) and 1999–2002 Discovery Series II in the LE, SD and SE trims.
Only one packer can be fitted under each coil seat. Stacking packers can overstress the spring.
The packer is an 8 mm steel spacer that sits under the front coil seat, adding thickness at the spring without changing the coil. Stacking packers can overstress the spring, so fit only one under each seat. Check that the spring seat has room for the packer before fitting, and follow the included instructions.
It fits the 1999 Discovery SD and the 1999–2002 Discovery Series II in the LE, SD and SE trims.
Key features
- 8 mm steel coil seat packer
- Front position
- Only one packer under each coil seat
Coil springs and packers
A coil spring carries the vehicle’s weight through the seat, and a packer changes the height at that seat only. Because it adds thickness under the spring, the coil is pushed further than it was designed to sit, which is why only one packer is used per seat.
Before fitting, clean the seat and the packer, and check that the spring sits square and fully seated. Look for a sagging coil, a worn seat, or a spring that has taken a permanent set, since those cannot be corrected by a packer alone.
After installation, check the height on both sides and look for the spring rubbing the body or the packer shifting. Recheck the packer after the first few drives, because the spring can settle.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMELRCP1 |
| Packer material | Steel |
| Thickness | 8 mm |
| Position | Front |
Vehicle fitment
It fits the 1999 Land Rover Discovery (SD) and 1999–2002 Discovery Series II in the LE, SD and SE trims.
Discovery years and models outside that list, and other Land Rover models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only one packer can be fitted under each coil seat. Follow the fitting instructions supplied with the packer, because stacking packers can overstress the spring.








