Select your vehicle

ARB Coil Spring Fitting Kit – OMEJGR10

ARB 4x4 Accessories

Shop ARB 4X4 Accessories Coil Springs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear polyurethane coil spring fitting kit, 10 mm, part OMEJGR10
  • Isolator between the coil spring and the body
  • Part number OMEJGR10, UPC 9332018002372
  • Model years to be confirmed before ordering

Description

Overview

The ARB OMEJGR10 is a rear polyurethane fitting kit, 10 mm, for Old Man Emu coil springs. It is an isolator that sits between the coil spring and the body, cushioning the spring so that it makes less noise.

Confirm fit for your vehicle’s year, model and trim before ordering. The kit is for Old Man Emu coil springs in the rear position.

Key features

  • Polyurethane isolator for the rear coil position
  • Size 10 mm
  • Intended to reduce spring-related squeaking and clunking
  • Part number OMEJGR10 with UPC 9332018002372

Noise and spring seating

A coil spring sits in a seat on the axle or the body, and metal contact there is a common source of rattles over rough ground. A polyurethane isolator placed between the coil and the body cushions that contact, which keeps the spring quieter as the suspension works through its travel.

Isolators wear over time. Polyurethane can crack, flatten, or lose its grip, so inspect it during routine service whenever the suspension is apart. Keep the seating surfaces clean and free of grit before a new isolator goes in, because debris under it can cause the same noise again.

Fitting usually goes hand in hand with checking the lower bushings, the shock mounts, and the bump stops, since any of these can also produce clunks.

  • Inspect the isolator during each service
  • Clean the seat before fitting a new kit
  • Check shock mounts and bushings for play

Specifications

Brand ARB 4×4 Accessories (Old Man Emu)
Part number OMEJGR10
UPC 9332018002372
Position Rear
Size 10 mm
Material Polyurethane
Type Coil spring fitting kit

Vehicle fitment

The kit is designed for Old Man Emu coil springs. Confirm fit for your vehicle’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear coil spring fitting kit.

SKU: ARBOMEJGR10 Category:

Specification

Shipping weight 0.25 lbs
Package dimensions 4.00 × 4.00 × 4.00 in
brands

Questions & Answers

Which vehicles does the ARB OMEJGR10 fit?

Confirm fit for your vehicle's year, model and trim before ordering. Match the kit to your rear Old Man Emu coil spring and check the model years against your truck.

Is the ARB OMEJGR10 for the front or the rear?

It is a rear kit at 10 mm. Confirm the position against your spring before ordering, since the front kit is a separate part.

Does the ARB OMEJGR10 include coil springs?

No. It is a polyurethane fitting kit that goes between the coil spring and the body, so the springs must be ordered separately.

Can I fit the kit without removing the spring?

Not usually. The isolator sits between the coil and the body, so the spring normally has to be lowered or removed to position it properly. Check the fitting steps for your vehicle before starting the job.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop ARB 4X4 Accessories Coil Springs on Amazon