Overview
The ARB CS005RB is a leaf spring from ARB 4×4 Accessories, part number CS005RB, built with a two-stage leaf pack. The primary leaves handle most of the work when the vehicle is unladen, and the secondary leaves add support as the load increases. Confirm fit for your vehicle’s year, model and trim before ordering.
The leaves are draw tapered and diamond cut, the leaf tips are fitted with regreasable nylon pads, and the leaves carry a graphite coating. The tension side of each leaf is shot peened, which reduces stress in the steel. The spring is also described with a military wrap on the eye for safety, and it is scragged and load tested before use.
Two-stage packs are chosen for vehicles that spend most of their time light but sometimes carry a real load. The secondary leaves are only engaged when the spring deflects far enough, so the unladen ride stays closer to a single-stage spring. That is the trade-off this design makes.
The CS005RB uses the same diamond cut and draw tapered leaf profile as the CS005RA, with graphite coating and nylon interleaf pads at the tips. Compare the part numbers and specifications when choosing between the two.
Key features
- Two-stage pack for a comfortable ride when unladen and extra support under load.
- Draw tapered leaves carry the load progressively along the spring.
- Diamond cut ends lower stress at the leaf tips.
- Scragged and load tested, so the spring takes a permanent set and is verified.
- Graphite coating lowers friction between the leaves.
- Regreasable nylon anti-friction pads.
- Military wrap for added safety.
- Shot peened tension side of each leaf.
Two-stage packs in daily use
A two-stage pack is a compromise between comfort and capacity. The primary leaves keep the ride softer when the truck is light, which matters on paved roads and gravel tracks, while the secondary leaves give the spring extra backbone once the rear is loaded with gear or passengers. The transition between stages is gradual, so the ride should feel steady rather than abrupt.
On the trail, the leaves flex through a wide range, and the interleaf pads see more movement than they do on the highway. That makes the pads and the leaf tips the areas to inspect most often. Clean mud and grit from the pack, keep the liners lubricated, and check that the leaves stay aligned when the spring is compressed. Keeping notes on service dates helps the schedule stay consistent over the life of the spring.
- Compare load needs with typical payload
- Grease pads on a regular schedule
- Look for uneven ride height between sides
- Check shackles and bushings during replacement
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS005RB |
| UPC | 9332018022479 |
| Type | Leaf spring |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
| Pads | Regreasable nylon |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, including axle type and mounting points.
What’s included
One leaf spring. Check the package contents against your installation before starting.



