Overview
The ARB IPF 840FYS is a rectangular fog light kit from ARB 4×4 Accessories, part number 840FYS. The kit includes two lights, a complete snap-together wiring loom with a relay, an LED toggle switch and white protective covers. The lenses are amber and the bulbs are halogen. The kit is not written for a particular vehicle, so it works as a universal lighting kit.
IPF designs its driving lights around real-world conditions. Focused light in front of the vehicle extends the distance the driver can see, which can help them react sooner and reduce fatigue on long night drives.
Key features
- Two rectangular lights in one kit.
- Snap-together wiring loom and relay included.
- LED toggle switch for switching the lights on and off.
- White protective covers for the lights when they are not in use.
- Amber lens color.
- Halogen bulb type.
- Stem mounting type.
Wiring and switching
Fog lights draw enough current that they should run through a relay and a fuse rather than the switch alone. The relay carries the load, so the switch only controls the relay coil. Route the harness away from moving suspension parts and heat sources, and secure it with clips so it does not chafe on the frame or bumper.
Mount the switch where the driver can reach it without looking away from the road. Confirm the lights only come on with the intended ignition or switch state, and test them on level ground before a trip. Ground connections should be clean and tight, since a poor ground is a common cause of dim or flickering output.
- Keep the harness clear of moving parts
- Use a fused, relayed circuit
- Clean and tighten all ground connections
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 840FYS |
| UPC | 4951499000223 |
| Lens color | Amber |
| Bulb type | Halogen |
| Light shape | Rectangular |
| Mounting type | Stem |
| Sold as | Kit of two lights |
Vehicle fitment
The 840FYS is universal fit. It is a lighting kit, not a vehicle-specific part, so no year, model or chassis is named. Choose a mounting position that suits your vehicle’s front end and check that the stem mount fits your bar or bumper before installing.
Installation notes
The kit includes a relay and a wiring loom, so the lights wire into the vehicle through the supplied harness rather than through the factory wiring. Check local rules before using amber driving lights on public roads, and connect the relay through a fused circuit.
What’s included
Two lights, one wiring loom with relay, one LED toggle switch and white protective covers.









