Overview
The ARB Intensity 40 Inch LED Light Bar AR40SARM761 is a 40 inch LED driving bar built with a heat sink and mounting system meant for a bull bar or roof rack. ARB 4×4 Accessories gives it universal fitment, so no particular model year or vehicle is named.
The mounting system is designed to keep the bar steady and to improve forward visibility compared with common systems fitted to other bars. Two rows of 20 individual LEDs sit behind a polycarbonate lens that uses the same reflector technology as the existing ARB Intensity LEDs. The bar is engineered in Australia and manufactured in the United States.
Key features
- Heat sink and mounting system built into the bar
- Attaches to a bull bar or roof rack
- Two rows of 20 individual LEDs
- Polycarbonate lens
- Reflector technology shared with existing ARB Intensity LEDs
- Engineered in Australia, manufactured in the United States
Choosing a mounting point
A 40 inch bar puts a lot of weight and wind load on the bracket it mounts to, so the bull bar or roof rack matters as much as the light itself. Before buying, measure the width of the rack or bar and check that it has room for a bar this long without blocking headlights or the view ahead. Roof racks are often rated for a set load, and the bar plus its wiring should stay well inside that limit.
Once mounted, look over the fasteners after the first few trail runs, since vibration can loosen them. Keep the wire route clear of moving parts and sharp edges, and inspect the lens for cracks or clouding over time, which can reduce light output. Cleaning with mild soap and water keeps the lens clear.
- Check wire routing before mounting
- Re-check fasteners after rough trail use
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | AR40SARM761 |
| UPC | 9332018046307 |
| Size | 40 inch |
| LED layout | Two rows of 20 individual LEDs |
| Lens | Polycarbonate |
| Mounting | Bull bar or roof rack |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit and is not tied to a model. Fit depends on the bull bar or roof rack it mounts to and on whether that rack has room for a 40 inch bar.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Attach the bar using its heat sink and mounting system to a bull bar or roof rack, then confirm it sits securely before driving. Run the power feed through a fused relay, and check local rules before using the bar on public roads.
What’s included
One 40 inch LED light bar, part AR40SARM761.
Not included: Brackets, wiring and hardware are not included, so check the package contents against your installation before starting.









