Overview
The KC HiLites 337 is a 40 inch rectangular LED spot light bar with a clear lens and bracket mounting. It is a universal-fit auxiliary light and can be mounted wherever a bracket can be secured on the vehicle. The LED bulbs have a life span of up to 50,000 hours and offer an even distribution of light.
The flood/spot beam suits off-road trail driving and other work that needs a wide, even pattern ahead of the vehicle.
Key features
- Rectangular 40 inch LED light bar
- Flood/spot beam type
- Clear lens
- LED bulb type with a claimed life span of up to 50,000 hours
- Described by the manufacturer as resistant to dust, water, shock and vibration
- KC HiLites says its optics give greater efficiency than other LED lights on the market
Mounting and beam aim
A flood/spot pattern gives a wide spread near the vehicle with further reach down the trail. Aim matters more than the light itself. Set the bar level and point the beam so the brightest zone falls a short distance ahead of the front wheels rather than into the sky. Recheck the aim after the bracket is tightened, because a small shift in the mount can move the pattern noticeably.
Clear lenses keep output high but show every scratch and water mark, so clean them regularly and check the seals after washing. Fused relay wiring protects the circuit and keeps the switch load low. Choose a mounting point that is solid and free of flex, since a bracket that moves will shift the aim and can wear the wiring.
- Check aim on level ground
- Clean the lens and check seals
- Re-tighten the bracket after rough trails
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 337 |
| UPC | 84709003371 |
| Length | 40 inch |
| Bulb type | LED |
| Lens color | Clear |
| Beam type | Flood/Spot |
| Light shape | Rectangular |
| Mounting type | Bracket |
| Life span | Up to 50,000 hours (manufacturer claim) |
| Fitment | Universal Fit |
| Sold as | Single |
Vehicle fitment
It is universal fit, so no specific year, make or model applies. Fitment depends on the mounting location and wiring you choose.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the bracket to a secure point on the vehicle and aim the beam before tightening. Wire the light through a fuse and relay rather than directly to the battery, and check local rules on auxiliary lights before using it on public roads.
What’s included
Confirm the included hardware and wiring before starting the installation.
Not included: Power wiring, a switch and a relay are needed to run the light bar.









