Overview
The ARB 2920 is an Old Man Emu coil spring, part number 2920, with UPC 9319092023356. Its vehicle fit is open, so confirm your truck’s year, model and trim before ordering.
Old Man Emu coils are made for a specific vehicle’s load capacity and handling. A spring chosen this way keeps the truck controlled and the ride comfortable when it carries weight.
Key features
- Direct fit label without a named model
- Made for a specific vehicle’s load capacity
- Part number 2920 with UPC 9319092023356
Matched sets and ride height
Springs at each corner share the load, so a single replacement can leave one side sitting higher than the other. Where the vehicle allows, replacing both springs on an axle keeps the stance even and the handling predictable. After the first drive, look at the wheel gaps and check that the truck sits level from front to back.
Shocks and bushings are worth checking at the same time, because worn dampers make a new coil feel harsh or floaty. Old coils that have settled often show a lower corner and a rear end that squats under cargo. If the stance does not come back after a fresh spring, the fault may lie in a worn mount rather than the coil. Note the measurements before you start.
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | 2920 |
| UPC | 9319092023356 |
| Type | Coil spring |
Vehicle fitment
Vehicle fit is not established for this spring. Compare the part number with your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coil springs change ride height and suspension geometry, so check the alignment and headlight aim after fitting. Confirm the vehicle first, since model fit has not been established.
Replacing one coil at a time can leave the corner heights uneven, so fit the springs as a matched set where the vehicle allows.
Recheck the ride height after the first drive once the vehicle is back on the ground.




