Overview
The ARB Bronco Rock Sliders, part number ARB4480010, are one-piece rock sliders for the Ford Bronco 4-door. They protect the lower sill area of the Bronco when used off-road and are finished in Integrit textured black powder coat. The manufacturer list shows them for the 2021 Ford Bronco.
The sliders mount directly to the vehicle chassis rail, spreading the load along the length of the vehicle. The design does not restrict ramp over angle, and multi-folded sheet steel provides strength without added thickness, which keeps the weight low.
Key features
- One-piece design that spreads the load along the sill
- Directly mounted to the chassis rail
- Does not restrict ramp over angle
- Multi-folded sheet steel, 4mm laser cut, folded and pulse welded
- Integrit textured black powder coat
Protecting the Bronco sill
Sill protection on a Bronco sits under the doors where the body is low and exposed. Rock sliders on this kind of vehicle protect the sill from ledges and rocks, while the underbody remains the main concern for ground clearance. A chassis-mounted slider transfers loads into the frame, so the mounting points matter as much as the steel.
Before a trail trip, inspect the coating for chips, check that the mounts are still tight, and look for shifting after rough sections. If you add larger tires or a lift, recheck clearance between the slider and the wheels, since changes in ride height alter what the slider meets on the trail. Keep the area free of mud so you can see wear early.
- Inspect the coating for chips
- Check mounts after rough terrain
- Recheck clearance after tire or lift changes
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARB4480010 |
| Material | Multi-folded sheet steel, 4mm laser cut |
| Construction | Folded and pulse welded |
| Finish | Integrit textured black powder coat |
| Type | Rock sliders |
| Installation type | No cutting or drilling required |
Vehicle fitment
The sliders are made for the 2021 Ford Bronco, including the Badlands, Base, Big Bend, Black Diamond, Outer Banks and Wildtrak trims. They are designed for the Bronco 4-door.
Two-door Broncos fall outside this fit. Check the year, model and trim against your vehicle before ordering.
Installation notes
Installation needs no cutting or drilling, and the sliders attach directly to the chassis rail. Confirm the mounting hardware before fitting.
What’s included
Confirm the box contents before installing.











