Overview
The DV8 Offroad HD Tubular Rock Sliders in black, part number SRGL-04 (DV8SRGL-04), are dual-tube rock sliders for the 2020–2026 Jeep Gladiator. They are the Gladiator HD rock sliders, built for off-road protection.
The dual tube design sits high and tight to the Jeep for high clearance on tight trails. Three reinforced frame mounting points are used, and the slim profile is intended to avoid unnecessary contact with rocks beside and below the sliders. A built-in skid plate at the front and rear mounting points is meant to keep the sliders from snagging on obstacles.
Key features
- Dual tube design that sits high and tight to the vehicle
- Three reinforced frame mounting points
- Slim profile to limit contact with rocks
- Built-in skid plate at the front and rear mounting points
- Black finish
Frame mounts and skid plates
Tubular sliders that mount to the frame transfer impact loads through the chassis rather than the body. That makes frame condition important. Look at the frame near each mounting point for rust, cracks or flaking, and check the fasteners after rough trails because vibration can loosen them.
A built-in skid plate at the front and rear mounts helps stop the slider from catching on obstacles, but it also adds contact area that can wear the tubing. Inspect the tubes and skid plate edges after each trip. Tire size and ride height change how the sliders sit relative to rocks, so recheck clearance after any suspension work.
- Check frame mount fasteners after rough trails
- Inspect skid plate edges for wear and bends
- Look for rust at tube ends and welds
- Recheck clearance after tire or suspension changes
Specifications
| Brand | DV8 Offroad |
|---|---|
| Part number | SRGL-04 (also DV8SRGL-04) |
| Type | Tubular rock slider |
| Finish | Black |
| Frame mounting points | Three reinforced points |
| Skid plate | Built-in at front and rear mounting points |
| Fitment type | Direct fit |
Vehicle fitment
DV8 Offroad lists these sliders for the 2020–2026 Jeep Gladiator, including the 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
The fitment covers only the 2020–2026 Jeep Gladiator, so Wrangler and other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Three reinforced frame mounting points are used, so the sliders mount to the frame. Check the mounting hardware and steps before starting the installation.
What’s included
Confirm which hardware comes in the box before you begin the fitting.




















