Overview
The ARB BP-51 Internal Bypass Shock, part number BP5190003R, is a front right bypass shock absorber for the 2008-2011 and 2013-2015 Toyota Land Cruiser, designed for vehicles with 0 in. lift or drop.
The BP-51 range was designed, developed and tested in-house by ARB’s Old Man Emu ride engineers. The shocks are vehicle specific, use existing mounting locations for installation without additional vehicle modification, and offer external, independent rebound and compression adjustment.
Key features
- Gas charged internal bypass shock, front right position
- 51mm bore, 6061 grade aluminium body with type III hard anodized finish
- External, independent rebound and compression adjustment
- 6061 grade aluminium remote oil canister, spring seat, adjustor and top hat
- Dash -6 high temperature Teflon hose and Teflon lined spherical bearings
- X5K grade steel coil, hard chromed ground piston shaft
- Impact resistant, high density polyethylene shaft guard and oversized rubber bushings
Before you buy
A shock absorber controls how quickly the suspension compresses and rebounds, so it affects body control on pavement and wheel control on rough trail. Bypass shocks route oil through an external canister, which helps keep the main body cooler under repeated hard use and supports steady damping on long descents. Before buying, confirm the vehicle’s current ride height and the position you need, since a front right shock works as one half of a pair.
Shocks are usually replaced in pairs on the same axle so damping matches from side to side. When fitting a new front shock, check the upper and lower mounts, bushings and spring seat for wear, and look over the old unit for oil leaks or a loose piston rod. Worn bushings or a leaking shock can make steering feel vague and cause uneven tire wear, so inspect the steering components and wheel bearings at the same time.
- Check for oil seeping from the body or canister
- Inspect bushings and mounting hardware
- Re-check torque after the first trail runs
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | BP5190003R |
| UPC | 9332018029096 |
| Product type | Internal bypass shock absorber |
| Series | BP-51 |
| Position | Front right |
| Bore | 51mm |
| Body | 6061 grade aluminium, type III hard anodized |
| Gas / hydraulic | Gas charged |
| Lift height | w/0 in. lift/drop |
| Coil | X5K grade steel |
| Piston shaft | Hard chromed, ground |
| Hose | Dash -6 high temperature Teflon |
| Fitment type | Direct fit |
Check the dimensions and weight against your build before ordering if size matters for your setup.
Vehicle fitment
The manufacturer fitment list for the ARB BP5190003R shock covers:
- 2008–2011, 2013–2015 Toyota Land Cruiser (Base)
It fits the 2008-2011 and 2013-2015 Land Cruiser (Base) models. The 2012 model year and other Land Cruiser generations are outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
- Professional installation is recommended for suspension, steering and brake components.
- Torque every fastener to the specified value and re-check it after the first miles of driving.
- Have the alignment checked after any suspension or steering work, and check that tires, hoses and lines have clearance through the full range of travel.
What’s included
A front right BP-51 shock with a remote oil canister, Teflon hose, spherical bearings, spring seat, coil and shaft guard.





