Overview
The ARB Air Locker Manifold Kit, part number 171503, is a differential air system component from ARB 4×4 Accessories for use with the CKMTA 12 or 24 twin compressor. It sits in the differential air system line category, so it belongs with the air system rather than the vehicle itself.
Compressor pairing and setup
A manifold kit routes air from a compressor to the air lockers, so it works as one link in a larger system. Before buying, confirm the compressor you run and make sure the kit matches it. Compressor output, duty cycle and tank capacity affect how quickly lockers engage, so consider those figures when planning how much air the system needs on the trail.
Air fittings are a common source of leaks in these systems. When assembling the kit, use thread sealant suited to air lines, tighten fittings without overtightening, and then check for leaks with soapy water. Route air lines away from heat and moving parts, and secure them with clamps so they do not chafe during articulation.
- Confirm the compressor model before assembly
- Check fittings for leaks after installation
- Keep air lines clear of heat and moving parts
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 171503 |
| UPC | 70000575754 |
| Kit type | Air locker manifold kit |
| Compatible compressor | CKMTA 12 or 24 twin compressor |
Vehicle fitment
It is a universal fit kit, so compatibility is set by the compressor rather than by vehicle. Match it to a CKMTA 12 or 24 twin compressor.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the compressor model before starting, since the kit is specified only for the CKMTA 12 or 24 twin compressor.
What’s included
The kit is the air locker manifold kit itself. Check hoses, fittings and other hardware against your installation before starting.
Not included: The CKMTA 12 or 24 twin compressor is not part of this kit.









