Overview
The ARB Awning Windbreak, part number 813207, is a front and side wind barrier for an ARB awning. Awnings block sun and rain but not wind, so this windbreak adds wind protection and four extra tie-down points per windbreak to help anchor the awning. ARB classes the windbreak as universal fit.
Key features
- Front and side wind barrier
- Four extra tie-down points on each windbreak
- Helps anchor the awning
- Universal fit
Wind protection for awnings
Wind is the main threat to an awning, because the canopy acts like a sail once a gust gets under it. A windbreak blocks that flow at the front and sides, which reduces lift and flapping. The tie-down points give you extra anchor options where the awning meets the ground.
Anchor the windbreak in line with the awning and pegs at the ground, and keep the straps tight without stretching the fabric. Choose a site with natural shelter where you can, and set the awning before the wind builds rather than during a gust.
Inspect the windbreak fabric, seams and tie-down points after each trip. Dust and salt can wear fabric over time, so rinse and dry it before storage. Loose or torn points should be repaired before you rely on them in windy conditions. Replace worn pegs and ropes at the same time, since they carry the load the windbreak transfers.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 813207 |
| UPC | 9332018036209 |
| Tie-down points | 4 per windbreak |
| Fitment | Universal fit |
Vehicle fitment
This windbreak is not vehicle-specific. It is made for an ARB awning, so match it to your awning before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The awning the windbreak is made for is not included.









