Overview
The ARB Bushranger Inflatable X-Jack, part number 72X10, is an exhaust-inflated jack from ARB 4×4 Accessories. It lifts a vehicle by inflating when the engine runs, so no crawling under the vehicle to position a conventional jack is needed.
To use it, place the unit on the ground beneath the side of the vehicle to be raised, connect the hose to the tailpipe, and start the engine. It lifts up to 30 inches with an 8800 pound lifting capacity.
Key features
- Inflates from the exhaust when the engine is started
- Lifts the vehicle without crawling under it to set a conventional jack
- 8800 pound lifting capacity
- Lifts up to 30 inches, with a listed jack height of 31 inches
Using an exhaust-inflated jack
An exhaust-inflated jack relies on engine exhaust to fill its bladder, so the engine has to run while the vehicle is raised. Exhaust gases are harmful in enclosed spaces, so work outdoors and keep the hose end clear of people. Once the vehicle is up, the bladder holds pressure only as long as the connection stays sealed.
Ground conditions matter. Soft sand, loose gravel or sloping ground can let the unit shift as it inflates. Place the jack on firm, level ground, and once the vehicle is raised, support it on a stand or solid blocks rather than relying on the jack alone while you work underneath.
- Check hose connections for leaks before inflation
- Keep the unit clear of sharp rocks
- Lower the vehicle slowly and clear the area
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 72X10 |
| UPC | 70000345101 |
| Lifting capacity | 8800 pounds |
| Maximum lift | 30 inches |
| Jack height | 31 inches |
| Power source | Engine exhaust through a hose to the tailpipe |
Vehicle fitment
No vehicle is named for this jack and no year, make or model is attached. It is universal fit, so check that the lift height and capacity suit your vehicle before use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connect the hose to the tailpipe, set the unit beneath the side to be raised, then start the engine so it inflates. Keep clear of the raised vehicle while the jack is under load.
What’s included
Confirm that a connecting hose is included before setting up, since the hose is needed to inflate the unit.








