Overview
The AirDog PureFlow 2 Micron Fuel Filter, part number FF100-2, is a replacement fuel filter for AirDog and AirDog II filtration systems. It carries a 2 micron filtration rating and is made by AirDog PureFlow for those lift pump systems.
A clogged fuel filter restricts flow and reduces fuel pressure to a diesel engine, so a plugged filter should be replaced.
Key features
- 2 micron filtration rating
- Replacement filter for original AirDog systems
- Replacement filter for AirDog II systems
- Intended to replace a plugged filter that can cause low fuel pressure and flow
Filter change timing
A lift pump draws fuel from the tank and pushes it through the filter toward the injection pump. The filter element gradually traps debris and water, and as it loads up the flow path narrows. Many owners find that a filter checked with a restriction gauge or a vacuum reading is easier to schedule than one changed on a guess. Watch for hard starts, hesitation under load, or a pump that sounds strained when the tank is low, since these often point to a restricted filter rather than a failed pump.
When replacing the element, prime the system fully before cranking so the lift pump is not run dry, and check the seals and O-rings for nicks. Keep fuel clean during the swap by capping lines and wiping the housing. A 2 micron rating catches finer particles than coarser elements, which can help protect injectors, but it may load up faster in dirty fuel, so inspect it on a shorter interval after fuel stops.
Specifications
| Brand | AirDog PureFlow |
|---|---|
| Part number | FF100-2 |
| UPC | 38568026118 |
| Filtration rating | 2 micron |
| Compatible systems | AirDog and AirDog II filtration systems |
Vehicle fitment
This filter is marked Universal Fit. It is made for AirDog filtration systems rather than a specific vehicle, so no makes, model years or chassis codes are given for it.
Confirm your AirDog system type before ordering.








