Overview
The AirDog PureFlow 150 Fuel Preporator, part number A4SPBF171, is a lift pump and fuel preporator unit for the 1999–2003 Ford F-250 Super Duty and F-350 Super Duty, and the 2000–2003 Ford Excursion. It is rated for up to 800hp and is a direct fit for those vehicles.
Think of it as a conditioning stage placed ahead of the engine feed. Fuel leaves the tank under vacuum carrying air, vapor, particles and some moisture. A water separator strips out the water and larger particles before the fuel pump, and the filter then catches the remaining particles while separating entrained air and vapor. That separated air goes back to the tank after the regulator. The regulator holds the pressure the engine needs and returns the extra fuel to the tank, and the Excursion is the only listed model that is not a Super Duty truck.
Key features
- Rated for up to 800hp.
- Single piece pump body in place of the older 3 piece design, with fewer parts and a smaller, lighter unit.
- Low profile assembly that does away with gaskets prone to leaking.
- Frame mounting with no drilling.
- Relay harness and fuel mounting hardware are supplied with the unit.
- Plastic ties and an installation manual are also supplied.
Signs the fuel system needs attention
Fuel delivery problems often show up under load first. Hesitation during acceleration, a drop in power when towing, or a stall after the engine has warmed up can all point to restricted flow or air in the supply. A failing lift pump or a clogged separator can cause these symptoms before the engine ever fails to start, so they are worth taking seriously.
When the preporator is installed, look at the rest of the fuel system at the same time. The tank pickup, lines and fittings should be free of cracks and leaks, and the regulator should return surplus fuel correctly. Keeping the separator and filter on a regular service plan helps the whole system stay consistent.
- Watch for hesitation under load
- Look for leaks at fittings
- Check the regulator return line
Specifications
| Brand | AirDog PureFlow |
|---|---|
| Part number | A4SPBF171 |
| UPC | 813094016716 |
| Product type | Fuel preporator and lift pump unit |
| Power rating | Up to 800hp |
| Pump body | Single piece |
| Mounting | Frame mount, no drilling |
| Included hardware | Fuel mounting hardware, relay control wiring harness, plastic ties, installation manual |
Vehicle fitment
The manufacturer fitment list includes the 2000–2003 Ford Excursion (Eddie Bauer, Limited, XLT), the 1999–2003 Ford F-250 Super Duty (Lariat, XL, XLT) and the 1999–2003 Ford F-350 Super Duty (Lariat, XL, XLT).
Verify year, model and trim against your vehicle before ordering. Models such as the F-450 Super Duty and F-150 need a separate fit check.
Installation notes
Mounting to the frame needs no holes drilled, and the supplied fuel mounting hardware is used for it. The relay control wiring harness handles the electrical side, and the included installation manual covers the wiring steps. Battery disconnection comes first, before the relay harness is wired.
What’s included
Boxed with the PureFlow 150 unit: a relay harness, the fuel mounting hardware set, plastic ties, and an installation manual.












