Overview
The AirDog PureFlow 100 Fuel Preporator, part number A4SPBD000, is a fuel preporator and lift pump kit for 1994–1998 Dodge Ram 2500 (Base) and Ram 3500 (Base) trucks. It is rated for up to 500 horsepower and fits those trucks directly.
Fuel is drawn from the tank under vacuum and passes through a water separator that removes water and large particles before it reaches the fuel pump. The fuel then moves under positive pressure into the filter, where the remaining particles are trapped and entrained air and vapor are separated out. The separated air and vapor return to the tank after the regulator. The regulator holds the fuel pressure going to the engine, and surplus fuel goes back to the tank as well, so the engine only receives what it needs.
Key features
- Rated for up to 500 horsepower.
- Single piece pump body replaces the older 3 piece pump design, cutting the number of parts, unit size and weight.
- Low profile pump assembly that removes the leaky, messy gaskets of the old design.
- Mounts to the frame with no drilling required.
- Installation does not require dropping the fuel tank.
- All-inclusive installation kit with a relay control wiring harness, fuel mounting hardware, plastic ties and an installation manual.
Fuel delivery on older Ram trucks
A fuel preporator sits between the tank and the main fuel pump, so the lift stage can supply the pump with steady fuel and fewer air bubbles. Older diesel trucks are often refitted this way because the factory lift setup can struggle when demand rises from added power or a larger injection system. Separating water and particles early protects the injection components further down the line.
Installation is simpler when the mounting area and wiring are checked first. Confirm the frame mount location is clear of heat and moving parts, and route the fuel lines so they do not rub or kink. Keep the relay harness away from the battery leads and secure every plastic tie. Reconnecting the battery only after the wiring is complete helps avoid stray sparks during the job.
- Inspect fuel lines for chafing before fitting
- Keep the water separator drained
- Replace the filter element on a regular schedule
- Check for leaks at fittings after the first start
Specifications
| Brand | AirDog PureFlow |
|---|---|
| Part number | A4SPBD000 |
| UPC | 813094015009 |
| Product type | Fuel preporator and lift pump kit |
| Power rating | Up to 500 horsepower |
| Pump body | Single piece |
| Mounting | Frame mount, no drilling required |
| Included hardware | All fuel mounting hardware, plastic ties, relay control wiring harness |
Vehicle fitment
The manufacturer fitment list covers the 1994–1998 Dodge Ram 2500 (Base) and the 1994–1998 Dodge Ram 3500 (Base). Both entries list only the Base trim.
The list does not include the Dodge Ram 1500 or any model year outside 1994–1998. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The frame mounts need no drilling, so the fuel mounting hardware in the kit is used to secure the unit. The relay control wiring harness is included for the electrical connection. Disconnect the battery before connecting the relay harness.
What’s included
The kit includes the PureFlow 100 Fuel Preporator together with the fuel mounting hardware, relay control wiring harness, plastic ties and installation manual.












