Overview
The AirDog II-4G fuel air separation system, part number A6SABF488, is a diesel fuel system for the 2011–2016 Ford 6.7L Powerstroke. It separates entrained air and water vapor from the fuel before the injection system receives it.
The fourth generation design uses a dual feed gerotor pump and a low amperage, self-aligning motor. It is designed to help maintain correct injection timing and a full power stroke.
Key features
- Dual feed gerotor pump
- Low amperage motor
- Self-aligning motor with reduced noise and maintenance
- Intermediate pump shaft separates the motor from the fuel
- Compact housing measuring 7 x 10 x 3.2
- Designed to improve fuel economy and power output
Before you buy
A fuel air separator sits between the tank and the injection system, so its job is to catch water and air before they reach the high pressure components. Diesel picks up water from condensation in the tank and from fuel stations, and that water can cause hard starts, rough running and wear on injectors. A separator that works well keeps those problems from reaching the pump.
Think about how you drive and where you fuel when deciding how closely to watch the system. Trucks used for towing, long highway trips or off-road work often run through more fuel and see more temperature change, which makes regular checks worthwhile. Replacing the fuel filter at the same time as separator service is common practice.
- Drain collected water as part of routine checks
- Inspect fuel lines and fittings for leaks after service
- Prime the system after any filter or separator work
Specifications
| Brand | AirDog PureFlow |
|---|---|
| Part number | A6SABF488 |
| UPC | 813094019885 |
| Fuel type | Diesel |
| Engine application | 2011–2016 Ford 6.7L Powerstroke |
| Pump | Dual feed gerotor |
| Size (L x T x W) | 7 x 10 x 3.2 |
Vehicle fitment
It fits the 2011–2016 Ford F-250 Super Duty and F-350 Super Duty in King Ranch, Lariat, Platinum, XL and XLT trims.
Ford models and Super Duty years outside 2011–2016 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Disconnect the battery before working on this fuel system, and keep open flames away from fuel lines. Confirm the mounting and wiring procedure before starting.
What’s included
Check the package contents against your installation before starting.











