Overview
Rigid Industries part 480093 is an A-Series LED accessory light that Rigid positions as universal. It is aimed at cabs, cabins, truck beds, trunks and the area under a hood, where a compact lamp can add light.
The aluminum body is compact and durable. It is waterproof and lightweight, and the A-Series comes in a range of LED colors and in high and low power builds.
Key features
- Universal design with no named vehicle
- Durable compact aluminum housing
- Waterproof and lightweight
- Flat-mount or tube-mount installation
- Side or bottom wire exits through the adapter
Mounting a compact accessory lamp
The flat-mount and tube adapter give two routes for placement. A flat surface suits the rubber mount or the adhesive pad, while a round rail or tube suits the radius adapter. Choose the spot first, then pick the mount that matches the surface. Keep the wire exit clear of pinch points and moving parts.
Adhesive pads hold best on clean, dry, smooth surfaces, so prepare the area before pressing the pad in place. Route the wire through a fused power feed and a switch, and plan the cable path before fixing the lamp. Recheck the mount after the first few drives, since vibration can loosen adhesive or clamps over time.
- Clean the surface before applying the adhesive pad
- Choose the wire exit before fixing the lamp
- Recheck clamps and pads after the first drives
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 480093 |
| UPC | 849774018428 |
| Housing | Durable compact aluminum |
| Construction | Waterproof, lightweight |
| LED options | Variety of colors; high and low power versions |
| Included mounts | Rubber flat-mount, 3M VHB two-way pad, radius tube-mount adapters |
| Wire exit | Side or bottom |
Vehicle fitment
No year, make or model is attached to this universal listing. Fit comes down to the panel, bracket or bed rail you plan to use.
Measure the chosen spot and check clearance for the wire exit first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose the flat pad or the radius tube adapter, then route the wire out the side or bottom. Fuse the power feed and check local rules for auxiliary lights before driving with the lamp fitted.
What’s included
The kit has the rubber flat-mount, the 3M VHB two-way pad and the radius tube-mount adapters.
Not included: Plan a power harness and switch before installing the light.









