Overview
Rigid Industries A-Series LED accessory light, part 480333, is a universal-fit light for placement wherever extra light is needed on a vehicle or boat. Rigid names vehicle cabs, work vehicle beds, trunks, boat cabins and under-hood spaces.
A compact aluminum housing, waterproof construction and light weight make placement simple. The A-Series comes in various LED colors and in high and low power versions.
Key features
- Universal design for vehicles and boat cabins
- Compact aluminum housing
- Waterproof, lightweight build
- Various LED colors, high and low power versions
- Flat or tube-mount adapters
Marine and vehicle placement
Boat cabins and vehicles put very different demands on a lamp. In a cabin, spray, humidity and salt air make sealed fasteners and careful wire routing important. On a vehicle, vibration and road grime are the bigger concerns, so the mount needs firm backing and the cable needs strain relief at the adapter.
Choose the flat-mount or 3M VHB pad for smooth, clean faces, and the radius tube adapter for angled or rounded surfaces where the wire has to exit the side or bottom. Test the beam angle with the lamp temporarily taped in place before making permanent holes or bonds, since a small shift can change what the light covers.
- Seal fasteners in marine installs
- Use strain relief at the tube adapter
- Test the beam before permanent mounting
- Clean surfaces thoroughly before bonding
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 480333 |
| UPC | 849774018664 |
| Housing | Compact aluminum |
| Construction | Waterproof, lightweight |
| LED options | Variety of colors; high and low power versions |
| Mounting | Rubber flat-mount, 3M VHB two-way pad, radius tube-mount adapters |
Vehicle fitment
Rigid marks this as universal, so no year, make or model is attached to 480333. Placement should follow the mount you choose and the space you have.
Pick the location first, then the mount. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adapters set the route: a flat-mount for flat faces, and the tube adapter for a side or bottom wire exit. Protect the feed with a fuse and follow your area’s rules on auxiliary lighting.
What’s included
The light ships with a rubber flat-mount, a 3M VHB two-way pad and radius tube-mount adapters.
Not included: A harness, switch and fuse are not included. Plan to supply them before wiring the light.









