Overview
The Rigid Industries E-Series 6 Inch Combo LED Light Bar, part number 106322, is a bracket-mounted LED bar with a combined flood and spot beam. It is sold as a single unit with a clear lens.
The E-Series was the first projected LED light bar, introduced in 2006. It suits light truck and car applications, vehicle race teams, farming equipment and police or fire rescue vehicles. The bar is universal fit, so compatibility depends on the bracket location and the wiring chosen.
Key features
- Combined flood and spot beam in one bar
- Extruded aluminum housing for the light body
- Polycarbonate lens sealed against the elements
- The design projects light at long distances while drawing very little power.
- Bracket mounting with a clear lens and LED bulb type
- Universal fit, 6 inch size
Combo beams on the trail
A combo bar gives a broad flood across the near ground and a tighter spot for distance, so one fixture can cover both jobs. That is convenient on a vehicle with limited mounting room, but it also means the mounting angle has to balance the two parts of the beam. Tilt the bar slightly down to put the flood where you walk or work, and let the spot reach ahead.
Bracket-mounted combo bars carry the weight of the whole assembly through the bracket, so check the fasteners after the first few drives. Make sure the wire route stays clear of the tire, suspension and any cargo. Clean the lens regularly, since dirt on the surface spreads the flood and softens the spot.
- Tilt slightly down to balance flood and spot
- Check bracket fasteners after early drives
- Keep the wire clear of moving parts
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 106322 |
| UPC | 849774003240 |
| Product type | Light bar |
| Beam | Flood/Spot combo |
| Housing | Extruded aluminum |
| Lens | Polycarbonate, sealed against the elements |
| Lens color | Clear |
| Bulb type | LED |
| Mounting type | Bracket |
| Size | 6 inch; listed range 0 to 10 inch |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
The combo bar is universal fit and is not built for one vehicle. Check the bracket location for clearance and confirm a route for the wiring before mounting.
A combo pattern pairs a broad flood with a tighter spot, so the mounting angle decides where each part of the beam lands on the ground.
Installation notes
Run the wiring through a switch and a fused relay, and keep the cable clear of moving parts. Confirm the mounting hardware that comes with the bar before drilling.
What’s included
One 6 inch E-Series combo LED light bar, sold as a single unit.
Not included: Check the package contents against your installation before starting. A power cable and fused relay are not part of this package.









