Select your vehicle

4 Wheel Parts Factory T-Series Wheel, 20x9 with 6 on 135 Bolt Pattern – Satin Black – 5014-293650

4 Wheel Parts

Shop 4 Wheel Parts Wheels 20x9 on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 4 Wheel Parts T-Series 20 inch split spoke wheel, part number 4WP5014-293650
  • No vehicle fitment is listed; check the 6 on 135 bolt pattern and center bore 87 against your hub
  • Satin black finish, aluminum construction, 9 inch width
  • Offset 0, backspacing 5

Description

Overview

The 4 Wheel Parts T-Series 20 inch wheel, part number 4WP5014-293650, is a satin black aluminum split spoke wheel with a 6 on 135 bolt pattern and a 9 inch width. 4 Wheel Parts positions the T-Series as trail-ready wheels for aggressive off-road use, meant for both the trail and open country driving.

No vehicle is named for this wheel. Use the bolt pattern, center bore and offset in the specifications to check fit against your hub before choosing it, since wheel fit depends on those figures rather than on a general fit label.

Key features

  • Split spoke design in the T-Series line
  • Satin black finish
  • Aluminum construction
  • 20 inch diameter and 9 inch width
  • 6 on 135 bolt pattern
  • Center bore 87 and offset 0
  • Built as a trail-ready wheel for aggressive off-road use.

Trail use and wheel protection

Trail-ready wheels take impacts from rock edges and roots, so the spoke faces and outer lip are the likely places for chips. Inspect them after each trip, and touch up exposed metal before moisture reaches the aluminum.

Satin black wheels show dust and road grime less than polished finishes, but dried mud can still leave marks. Rinse the wheels after muddy runs to keep the surface even and to make later inspection easier. Tire pressure affects how the bead seats against the rim, and low pressure on rocks can pinch the tire against the lip. Set pressures for your load and terrain, and recheck them before each trail day.

  • Rinse mud off after every trail outing
  • Look for chips on the spoke faces
  • Check bead seating after airing down

Specifications

Brand 4 Wheel Parts
Part number 4WP5014-293650
Series T-Series
Style Split spoke
Finish Satin black
Construction Aluminum
Wheel diameter 20 inches
Wheel width 9 inches
Bolt pattern 6 on 135
Center bore 87
Offset 0
Backspacing 5

Vehicle fitment

Check the 6 on 135 bolt pattern and 87 center bore against your hub, and make sure the wheel fits your vehicle’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Hardware such as lug nuts and center caps should match the stud pattern and seat style before installation.

SKU: 4WP5014-293650 Categories: ,

Questions & Answers

Does this wheel list a vehicle fitment?

No specific vehicle is tied to this wheel. Fit depends on the bolt pattern, center bore and offset, so measure those against your hub before ordering.

What bolt pattern and center bore does this wheel have?

The wheel has a 6 on 135 bolt pattern and a center bore of 87. Offset is 0 and backspacing is 5, so compare these figures with your hub and axle before choosing this wheel.

What is the finish and construction of this wheel?

The wheel has a satin black finish and is made of aluminum. It is a split spoke style in the T-Series line, 20 inches in diameter and 9 inches wide.

Should I air down with these wheels?

Airing down can improve traction on loose ground, but lower pressure raises the risk of the tire pinching on rocks and unseating the bead. Air back up before highway driving and check the bead seat.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop 4 Wheel Parts Wheels 20x9 on Amazon