Overview
The 4 Wheel Parts Factory S-Series wheel is a 20 by 10 inch aluminum wheel with a gloss black milled finish, part number 4WP8018-218245. It has an 8 on 6.5 bolt pattern and an offset of -24.
The S-Series is a mesh-style street wheel with a 3D mesh design and milled accents, made for truck or Jeep owners moving up to larger tires who want a custom look. Fitment is labeled universal, and no vehicles are named.
Key features
- 3D mesh style with milled accents
- Gloss black milled finish
- Aluminum construction
- 8 on 6.5 bolt pattern
- 20 inch diameter and 10 inch width
Offset and clearance
Offset sets where the wheel’s mounting face sits relative to its centerline, and backspacing shows how much room sits behind that face. Together they decide how far the wheel moves toward the brakes, the suspension and the fender edge. A wheel that fits one truck may rub on another, even with the same bolt pattern.
Tire width and wheel width also change the clearance. A wider tire can reduce room at the brake caliper or the upper control arm, especially at full steering lock. Measure before buying, and recheck after the tire is mounted and the vehicle is at its usual ride height.
- Measure caliper clearance with the tire mounted
- Check suspension and inner fender clearance at full lock
- Confirm the tire’s load rating for the vehicle
- Recheck clearance after changing ride height
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 4WP8018-218245 |
| Series | S-Series |
| Style | S-Series 3D mesh |
| Finish | Gloss black milled |
| Construction | Aluminum |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 6.5 |
| Offset | -24 |
| Backspacing | 4.5 |
| Fitment listed | Universal fit, no vehicles named |
Vehicle fitment
No vehicles are named for this wheel. Fit depends on bolt pattern, offset and backspacing, so match the 8 on 6.5 bolt pattern, the -24 offset and the 4.5 backspacing to your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One wheel. Check whether lug nuts or center caps are needed before mounting.
Installation notes
Mount the wheel only after confirming that the 8 on 6.5 bolt pattern matches your hub. The -24 offset and 4.5 backspacing set how the wheel sits relative to the hub and suspension, so check clearance with the tire you plan to run.















