Overview
The 4 Wheel Parts 4WP52007B is an adjustable rear track bar for the 2021–2026 Ford Bronco. 4 Wheel Parts says its high clearance design fits vehicles with 0 to 3 inches of lift when used with the OEM track bar mount.
It is a direct fit track bar for the rear location. The bar is made from 1.375-inch DOM steel tubing with a 3-piece multi-rate bushing assembly at one end. The adjustable side uses a precision alloy FK rod end, which is built for handling and performance.
The sleeve on the adjustable side can be set with the bar still on the vehicle. That lets you align the axle without disassembling the suspension.
Key features
- On-vehicle adjustable sleeve for precise axle alignment
- 1.375-inch DOM steel tubing
- 3-piece multi-rate bushing assembly at one end
- Precision alloy FK rod end on the adjustable side
- High clearance design for the OEM track bar mount
- Rear location
Alignment after installation
A track bar keeps the rear axle centered side to side, so its setting affects steering, tire wear and how the rear tracks. An adjustable track bar lets you correct axle position after a suspension change without taking the whole assembly apart. Work through the adjustment in small steps and re-check the result after each change.
Bushings and rod ends are the parts that usually wear first on a track bar. Check the bushing for cracking, and feel the rod end for play by moving the bar by hand. Worn parts can make the axle drift or the rear end feel loose, so address them before setting alignment. After any lift or suspension change, the track bar geometry should be checked again.
- Set the sleeve with the bar on the vehicle
- Check bushings for cracks and rod ends for play
- Re-check alignment after changes to ride height
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 4WP52007B |
| Location | Rear |
| Tube | 1.375-inch DOM steel |
| Bushing | 3-piece multi-rate assembly |
| Rod end | Precision alloy FK |
| Lift height rating | 0 to 3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2021–2026 Ford Bronco and uses the OEM track bar mount.
This fit is for 2021–2026 Ford Bronco models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Set the adjustable sleeve with the bar still on the vehicle, so axle alignment is made without disassembling the suspension. Have the alignment checked again after any lift is installed.
What’s included
The adjustable rear track bar with its 3-piece multi-rate bushing assembly and FK rod end. Check the hardware count against your installation before starting.

















