Overview
The 4 Wheel Parts 4WP52233BX-2 is a rear 2.5 in gas-charged coilover shock for the 2021–2026 Ford Bronco. It belongs to the 4WP FACTORY line of Bronco suspension components, which 4 Wheel Parts designed to add off-road capability and a distinctive look.
The coilover body is hard-anodized and impact forged from thick-wall stock. Anodizing improves appearance and reduces friction and bore wear. The shaft is chrome-plated 17-4 PH precipitation-hardened stainless steel for corrosion and abrasion resistance. Each shock is tuned with Vehicle Specific Ride Tuning (VSRT) for on-road ride quality and off-road performance. A coilover combines the coil spring and shock in one assembly, and this one mounts at the rear. It mounts to the Bronco without modification.
Key features
- Rear coilover design with a 2.5 in body diameter
- Gas-charged shock body
- Hard-anodized, thick-wall impact-forged body
- 17-4 PH precipitation-hardened stainless steel shaft with chrome plating
- Vehicle Specific Ride Tuning (VSRT) for the Bronco
- Hard anodizing reduces friction and bore wear.
Rear coilover maintenance
A rear coilover combines the spring and damper, so wear in either part shows up as a change in ride. Check the shock body for oil seepage, and look at the mounting hardware for loose or corroded bolts. Anodized bodies resist scratches, but deep gouges in the finish can let moisture reach the bore and speed up wear.
Because the rear spring and shock work as one unit, a worn coilover is often replaced alongside its partner on the other side. Matched shocks keep the rear of the truck balanced under load. When the shocks are out, check the upper mount, bushings and any bump stop for cracks, since these parts often fail together.
- Look for leaks on the shock body
- Inspect upper mounts and bushings
- Replace in pairs for balanced handling
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 4WP52233BX-2 |
| Position | Rear |
| Shock type | Coilover |
| Body diameter | 2.5 in |
| Charge | Gas charged |
| Body | Hard-anodized, impact forged |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Ride tuning | Vehicle Specific Ride Tuning (VSRT) |
| Fitment | Direct fit |
Vehicle fitment
It is a rear coilover for 2021–2026 Ford Bronco models.
The fitment covers 2021–2026 Broncos only. Other model years and other Ford vehicles are not covered.
Confirm your vehicle’s year, model and trim before ordering.















